Mr-Glass Construction Service Nationwide

Why Boca Raton Homeowners Choose Mr-Glass Construction

Rowan Construction Group Boca Raton provides independent Mr Glass service in Boca Raton for homeowners who need frameless shower enclosures, impact-rated glass, and custom mirror systems repaired or installed correctly the first time. We are not affiliated with, authorized by, or endorsed by Mr-Glass; we are an independent trade provider that sources OEM-compatible parts and applies installation methods developed specifically for Boca Raton’s salt-air, high-velocity hurricane zone conditions. Call (754) 254-8065 to schedule your free estimate.

Call (754) 254-8065

Mr-Glass products are common across Boca Raton’s housing stock, from the 1970s CBS ranch homes in Woodfield Country Club to the coastal condos along A1A where Mr Glass in Delray Beach and nearby areas also requires impact-rated glazing that is code-mandated. We’ve worked on enough of these systems to know where they fail and why. The aluminum frames on Mr-Glass shower enclosures pit and corrode faster here than inland because the Atlantic salt load penetrates interior spaces through HVAC systems and open windows. Hinge hardware on frameless doors sags within three to five years of daily use, accelerated by humidity-driven expansion of surrounding tile and wall substrate. These are not defects; they are predictable wear patterns in a specific climate, and we address them with hardware and sealing strategies chosen for this environment.

Our approach is documented and priced in writing before any work starts, under Clause 1 of the Haven Standard. Grant Rowan has led glass and construction projects across Boca Raton, including tenant build-outs and structural repairs near Mizner Park, and our crew applies the same documentation-first discipline to every Mr-Glass service call.

Why Trust Rowan Construction Group Boca Raton for Your Mr-Glass Construction?

We know Mr-Glass products because we’ve installed and repaired them across Boca Raton’s coastal high-rises and single-family homes for years. We understand the exact tolerances, anchor specs, and finish details these systems demand. The 3/8-inch tempered panels in Mr-Glass frameless enclosures require precise hinge alignment; a 1/16-inch sag translates to binding, seal compression, and eventual water infiltration. Our technicians measure that tolerance with a feeler gauge, not a visual guess.

Grant Rowan grew up in Beverly Hills, CA, where his father spent weekends restoring a 1960s ranch house and handed him his first framing square at age nine. He trained in construction technology at Los Angeles Trade-Technical College before spending two decades learning how buildings actually behave under load, in heat, and through permitting offices. That background shows up in how we sequence a Mr-Glass installation: substrate moisture testing before anchor placement, expansion-joint allowance for Florida’s thermal cycling, and stainless-steel hardware substitution where standard aluminum will corrode. Measure twice, document everything, then build.

We source genuine Mr-Glass replacement hinges, seals, and hardware whenever available. When OEM parts are backordered or cost-prohibitive, we use high-quality aftermarket components that meet or exceed original specifications. Every repair or installation includes a documented photo record as standard, not an upgrade. You receive images of the condition we found, the work performed, and the finished assembly. Our crews are background-checked and uniformed; a live person answers calls 24/7. The 365-Day Done Right Promise applies to all Mr-Glass work: if it is not done right, we make it right, backed by The Haven Standard, not a handshake.

Common Mr-Glass Construction Problems We Fix in Boca Raton

• Corrosion and pitting of aluminum frames on Mr-Glass shower enclosures. Boca Raton’s salt-laden humid air attacks standard aluminum hardware even in interior bathrooms. The chloride ions accelerate galvanic corrosion at hinge points and frame joints. We replace corroded components with 316 marine-grade stainless steel where possible, and we apply a vapor-barrier detail behind wall-mounted frames to reduce salt migration through the substrate. This is standard on our Mr-Glass repairs, not an upsell.
• Hinge sag and door misalignment on Mr-Glass frameless shower doors. The 3/8-inch tempered panels are heavy; repeated daily opening and closing stress the pivot hardware. Humidity-driven swelling of surrounding tile backer board compounds the problem by shifting anchor points. We recently replaced a sagging Mr-Glass frameless shower door in a Boca Raton condo - the original hinges had corroded from years of salt air, and the 3/8-inch panel was binding against the tile. Our tech installed new stainless-steel hinges and a fresh bottom seal, then re-aligned the door so it swings cleanly; we also polished out hard-water etching on the glass. The homeowner avoided a full enclosure replacement and the shower has stayed watertight through two stormy seasons.
• Cloudy or scratched glass from improper cleaning or hard-water mineral buildup. Boca Raton’s municipal water runs moderately hard, and evaporative residue etches glass surfaces over time. Owners often compound the damage with abrasive scrubbers or ammonia-based cleaners that degrade factory seal coatings. We assess whether the clouding is surface-level (correctable with polishing compounds and sealant reapplication) or structural (requiring panel replacement). We then teach the homeowner the specific squeegee-and-mild-soap regimen that prevents recurrence.
• Silicone seal failure and water infiltration around Mr-Glass shower pans. Original installations frequently omit expansion accommodation for Florida’s expansive oolitic limestone soils and tile thermal movement. The silicone bead separates from the substrate, water migrates behind walls, and mold follows. Our repair includes substrate drying, backer-board assessment, and a flexible sealant system rated for the movement we measure in Boca Raton’s slab-on-grade construction.
• Impact-rated glass stress fractures in Mr-Glass window and door systems. The laminated glass required for Florida’s high-velocity hurricane zone withstands wind-borne debris but can develop edge cracks from thermal stress or improper frame installation. We evaluate whether the fracture originated from glass defect, frame racking, or foundation settlement - common in Boca Raton’s older CBS stock - and specify repair or replacement accordingly.

Before

After

Mr-Glass Parts & Our Repair-vs-Replace Approach

We stock genuine Mr-Glass replacement hinges, seals, and hardware at our Boca Raton facility for fast turnaround on common failures. When OEM parts are unavailable or the lead time exceeds what a functional bathroom can tolerate, we specify aftermarket components from vetted manufacturers whose tolerances and load ratings meet or exceed original specifications. We document the substitution in writing, with the part number and certification, so you have a record.

Our repair-vs-replace decision is straightforward and honest. If a Mr-Glass glass panel is deeply scratched, chipped at the edge, or the frame is structurally compromised by corrosion, we will tell you whether a targeted repair or full replacement makes more sense for your Boca Raton home. A hinge replacement and re-alignment on a frameless door runs a fraction of enclosure replacement cost. A panel with stress cracks near an anchor point, however, is a replacement; tempered glass cannot be field-cut, and the fracture pattern will propagate. We put that assessment in writing, with the price for each option, before you decide. Call (754) 254-8065 for your free estimate.

Our Mr-Glass Service Process - Step by Step

1. 1
   Diagnosis with documentation. We inspect the Mr-Glass system, measure hinge sag, test seal integrity, and photograph every condition we find. For shower enclosures, we check substrate moisture behind the frame with a pinless meter. For impact-rated windows, we examine edge seals and frame squareness. You receive these images before we quote.
2. 2
   Written quote with scope. Under Clause 1 of the Haven Standard, we deliver a flat written price with a written scope of work before any tool is picked up. The quote specifies OEM or aftermarket parts, labor hours, and the warranty term. No work proceeds without your signed approval.
3. 3
   Repair or installation with signed change-order discipline. If we discover concealed damage - rotted backer board behind a shower frame, for example - we stop, photograph, and present a change order with price and scope. No change proceeds without your signature. This is the administrative discipline that has kept our projects within a few percent of the agreed cost across 4,000-plus jobs since 2007.
4. 4
   Testing and verification. Shower doors are cycled fifty times to confirm smooth operation and seal contact. Impact glass is inspected for edge-bond integrity. We run water spray tests on enclosure seals and check drainage paths.
5. 5
   Warranty documentation and photo record delivery. You receive a written warranty, the complete photo record of work performed, and our maintenance recommendations specific to your Mr-Glass product and Boca Raton’s climate conditions.

Mr-Glass Products We Service & Install in Boca Raton

We service and install the full range of Mr-Glass residential products found in Boca Raton homes, as well as Mr Glass repair in Deerfield Beach: Frameless Glass Shower Enclosures with 3/8-inch tempered panels, including custom configurations for irregular wall angles common in Mediterranean Revival renovations; Semi-Frameless Sliding Shower Door Series, where we address track wear and roller degradation; Custom Mirrors and Glass Shelving, with moisture-resistant backing for humid bathrooms; and Impact-Rated Window and Door Glass meeting Florida Building Code’s high-velocity hurricane zone requirements. We stock hinges, seals, and hardware for the shower enclosure lines locally, and we coordinate laminated glass orders through our regional supplier for impact-rated replacements with code-compliant documentation.

We Also Service These Brands

Our multi-brand capability means we are not dependent on any single manufacturer. We regularly install and repair KraftMaid and Wellborn cabinetry, Cambria and Caesarstone countertops, Silestone surfaces, and Kohler and Toto fixtures, plus Kitchen Remodeling services for complete renovations. This sourcing depth gives our written quotes honest numbers rather than inflated ones, and it means we can match existing finishes in mixed-brand renovations without compromise.

FAQs - Mr-Glass Construction Service in Boca Raton

Is Rowan Construction Group Boca Raton authorized by Mr-Glass?

No. We are an independent trade provider and are not affiliated with, authorized by, or endorsed by Mr-Glass. We source OEM-compatible and quality aftermarket parts and apply installation methods developed for Boca Raton’s specific climate and code conditions. Our 365-Day Done Right Promise and written pricing apply regardless of brand authorization status.

Is the glass in Mr-Glass shower enclosures tempered, and can it be cut on-site?

Yes, Mr-Glass frameless shower enclosures use 3/8-inch tempered glass, and no, it cannot be cut on-site. Tempered glass is heat-treated for safety; once manufactured, it shatters into small granules rather than sharp shards if fractured. Any cutting must occur before tempering at a fabrication facility. If your panel dimensions change due to a remodel or substrate repair, we measure and order new glass with the correct edge polish and hinge bore pattern. Call (754) 254-8065 to schedule measurement.

How does Boca Raton’s salt air affect Mr-Glass aluminum shower frames?

The Atlantic salt load accelerates galvanic corrosion of standard aluminum hardware, even in interior bathrooms. Chloride ions penetrate through HVAC circulation and open windows, attacking hinge points and frame joints. We see pitting within three to five years on unprotected hardware. Our repair protocol substitutes 316 marine-grade stainless steel where possible and applies a vapor-barrier detail behind wall-mounted frames to reduce salt migration. This is climate-specific service you will not find in a generic installation manual.

Can you replace just the hinges on a Mr-Glass frameless shower door, or do we need a whole new enclosure?

In most cases, hinge replacement and door re-alignment restore full function without enclosure replacement. We assess whether the glass panel edge is intact, the anchor points in the wall substrate are sound, and the seal track is undamaged. If all three are true, a hinge swap with stainless-steel hardware and fresh seals is the right repair. We put both options in writing with prices so you can compare. Call (754) 254-8065 for your free estimate.

What is the best way to remove hard-water spots from Mr-Glass shower glass without scratching it?

Use a white vinegar solution (one part vinegar to three parts water) applied with a microfiber cloth, followed by a squeegee dry. Never use abrasive scrubbers, steel wool, or ammonia-based cleaners; these scratch the glass surface and degrade any factory seal coating. For etched spots that do not respond to vinegar, we offer a polishing service with cerium oxide compound and resealing. The homeowner who maintains the squeegee habit after our visit typically adds years to the glass clarity.

Do Mr-Glass enclosures require a specific type of wall anchoring for Boca Raton’s wind and humidity codes?

The enclosure itself is interior and not wind-loaded, but the wall substrate must be suitable for the weight of 3/8-inch tempered glass in a humid environment. We use corrosion-resistant anchors rated for the pull-out load, and we verify backer-board integrity before installation. In Boca Raton’s CBS construction, we frequently encounter tile-over-gypsum in older homes; this substrate requires additional blocking or cement-board upgrade to support hinge torque. We document the substrate condition and any upgrade required in your written quote before work begins.

Book Your Mr-Glass Service in Boca Raton, FL

Call (754) 254-8065 to schedule your free estimate for Mr-Glass repair or installation. We will inspect your system, document conditions with photographs, and deliver a flat written price with scope before any work starts. The 365-Day Done Right Promise applies. Bring a competitor’s written estimate and we will review it line by line at no charge.

Written by Grant Rowan, Owner at Rowan Construction Group Boca Raton, serving Boca Raton since 2007.