Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterOwens Corning Construction in Delray Beach, FL | Rowan Construction Group Boca Raton
We provide independent Owens Corning roofing service across Delray Beach, from the historic CBS homes near Del-Ida Park to the oceanfront rebuilds east of A1A. The one thing that makes our Owens Corning work here different: we sequence the Florida DEP coastal permit before the city permit on every CCCL project, because we’ve watched too many Delray Beach roofs sit idle while contractors discover that requirement mid-stream. Call (754) 254-8065 for a written estimate before any work starts.
Why Delray Beach Residents Choose Us for Owens Corning Service
We’ve installed and repaired Owens Corning Duration, Oakridge, and Berkshire systems across coastal Palm Beach County for years. That means we’ve tracked how their TruDefinition color granules hold up against Delray Beach’s direct Atlantic exposure, and we know which underlayment assemblies actually pass inspection when the wind-load inspector shows up.
We’re an independent contractor - not authorized or endorsed by Owens Corning - and that independence matters in a city where the Historic Preservation Board can reject a roofing plan for aesthetic incompatibility in districts like Nassau Park. We specify the right Owens Corning assembly for each roof rather than force a single product line. Our crews are background-checked and uniformed; a live person answers calls 24/7; and every visit produces a documented photo record, included as standard.
Grant Rowan, our owner, trained in construction technology at Los Angeles Trade-Technical College before spending two decades learning how roofs actually behave under coastal load and salt air. He’ll tell you the same thing he tells his youth baseball team on Saturday mornings: level matters before anything else does. Measure twice, document everything, then build.
Common Owens Corning Construction Problems We Solve in Delray Beach
- Granule loss and surface erosion on Duration and Oakridge shingles - Delray Beach’s direct Atlantic sun and salt spray strip granules faster than inland Palm Beach County, especially on west- and south-facing slopes where thermal cycling peaks. We see this on ten-year-old roofs that should have twenty years left.
- Corroded or failed roofing nails and metal drip edge - The 1950s-1970s single-wythe CBS homes that dominate central and western Delray Beach were built with standard steel fasteners, never upgraded for coastal exposure. Salt air rusts them through in fifteen years instead of forty.
- Wind uplift at the rake and ridge - Owens Corning’s six-nail high-wind pattern and proper starter-course detail get skipped by installers rushing to beat a dry window. After Hurricane Nicole’s gusts, we re-secured multiple Delray Beach roofs where the original nailing pattern was code-minimum.
- Sealant strip failure and blow-off at hip and ridge caps - Post-storm repairs often replace hip-and-ridge shingles without replacing the VentSure ridge vent as a system. The new caps seal poorly against old vent profiles, and the next named storm takes them.
- Deck rot beneath intact shingles - Delray Beach’s water table sits 2-3 feet below grade in eastern neighborhoods, and any roof leak channels moisture into CBS walls with no weep screed or drainage plane. We find this during tear-offs on Atlantic Avenue corridor rebuilds.
Before
AfterOwens Corning Service in Delray Beach: What Local Conditions Mean for Your Roof
Any Owens Corning roof project on the oceanside blocks east of the Coastal Construction Control Line needs a separate Florida DEP permit before the city permit can move, and that DEP review can add weeks. We sequence it first on beachside tear-offs because we’ve watched contractors commuting from Boynton Beach or Boca Raton blow their schedules by skipping this step and discovering it at inspection. Salt-air corrosion also forces us to spec stainless or hot-dipped galvanized fasteners, drip edge, and ridge-vent hardware as standard rather than an upgrade on these coastal roofs - not because it’s generous, but because standard steel fails here in half the time it would in western Palm Beach County, a principle we apply equally to our Bathroom Remodeling in Delray Beach.
On a 1962 single-wythe CBS home off Swinton Avenue near Del-Ida Park, we tore off a hail- and salt-worn Owens Corning Oakridge roof and found every original roofing nail rusted through with no hurricane straps at the deck - a situation we also address during our Kitchen Remodeling in Delray Beach when opening ceilings for inspections. Our crew re-nailed the sheathing to the truss with hot-dipped galvanized fasteners, set the rafters with straps, and installed a full Owens Corning Duration system with WeatherLock underlayment and VentSure ridge vent, then documented the strap nailing for the homeowner’s wind-mitigation file. That’s the kind of finding that doesn’t show up on a drone inspection.
Owens Corning Models & Products We Service in Delray Beach
We work with the full Owens Corning residential roofing system, not just the shingles. That includes Owens Corning sales & service for the Duration Series architectural shingles (including Duration Premium and Duration Designer color lines), Oakridge Series architectural shingles, and Berkshire Collection designer shingles. Underlayment and ventilation matter as much as the surface layer here: we specify WeatherLock ice and water barrier, Deck Defense synthetic underlayment, and VentSure ridge and off-ridge ventilation components as a matched assembly.
We stock genuine Owens Corning shingles, underlayments, and VentSure components for fast Delray Beach turnaround. When a quality aftermarket accessory matches the assembly’s spec and warranty requirements, we’ll specify it and explain why. We don’t substitute to save a few dollars and void your system warranty.
Owens Corning Service Pricing in Delray Beach
| Service | Price Range |
|---|---|
| Roof Replacement (Owens Corning architectural shingle system) | $8,000-$20,000 |
| Roof Repair (flashing, shingle, and fastener repair) | $400-$1,800 |
What drives the cost: roof pitch and access, whether we’re working around existing solar or HVAC equipment, the condition of the deck and fasteners beneath the shingles, and whether the project falls east of the CCCL and needs DEP permitting. A written price with line-item scope and warranty terms is delivered before any work starts - that’s Clause 1 of the Haven Standard, and it’s how we’ve kept projects within a few percent of the agreed number across 4,000-plus jobs since 2007. Call (754) 254-8065 for your free estimate.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Owens Corning Construction in Delray Beach
Will an Owens Corning shingle roof meet Delray Beach’s hurricane wind-load and product-approval requirements?
Yes, when installed as a complete system with the six-nail high-wind pattern, proper starter course, and VentSure ventilation that Owens Corning specifies for Miami-Dade and Palm Beach County wind zones. We document every fastening pattern for your wind-mitigation inspection. Call (754) 254-8065 to review your specific roof geometry.
Do you need a Florida DEP permit before repairing or replacing an Owens Corning roof east of the Coastal Construction Control Line?
Yes. Any construction east of the CCCL requires DEP coastal review before Delray Beach will issue its building permit. We file that application first on beachside projects because the timeline is outside our control. Call (754) 254-8065 and we’ll check your property’s CCCL status.
My Oakridge shingles are only about a decade old but the granules are washing into the gutters - is that the salt air or a defective roof?
Salt air and UV exposure in Delray Beach accelerate granule loss beyond the manufacturer’s inland expectations. It’s usually environmental, not defective, but we photograph the slope, measure remaining granule depth, and compare it to Owens Corning’s published wear criteria before recommending repair or replacement. Call (754) 254-8065 for a free assessment.
Will you spec Owens Corning underlayment and ventilation, or can we just shingle over what’s there?
We specify WeatherLock underlayment and VentSure ventilation as part of any Owens Corning system we install. Shingling over old underlayment voids the system warranty and traps heat that shortens shingle life in Delray Beach’s climate. The photo record from your estimate will show you exactly what’s beneath your current roof.
Do you replace the corrosion-prone fasteners and drip edge on older CBS homes when you do an Owens Corning re-roof?
Yes. On 1950s-1970s Delray Beach CBS homes, we remove and replace all fasteners with hot-dipped galvanized or stainless steel, and we install matching drip edge. Original steel nails in these homes are typically rusted through. The cost is included in our written scope, not added later.
Service Areas Near Delray Beach
We serve Delray Beach service area homeowners directly, and we regularly schedule Owens Corning projects in Owens Corning service in Boca Raton to the south, Owens Corning service in Deerfield Beach to the north, plus Lighthouse Point, Coconut Creek, and Pompano Beach. The same DEP permitting rules, salt-air fastener specs, and documentation standards apply across coastal Palm Beach and northern Broward counties.
Book Your Owens Corning Service in Delray Beach Today
Call (754) 254-8065 to schedule your free estimate. We’ll deliver a written price with line-item scope before any work starts, document every phase with photos you keep, and back the result with our 365-Day Done Right Promise. If your project sits east of the CCCL, we’ll sequence the DEP filing so your timeline holds.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Delray Beach since 2007.