Cambria Roofing Nationwide

Cambria Roofing: The Boca Raton Owner’s Guide

Cambria roofing components in Boca Raton typically run $400-$1,800 for professional repair and $8,000-$20,000 for full replacement, with most Cambria-compatible parts available same-day through our supplier network. We stock and install OEM and quality aftermarket equivalents for Cambria’s roofing systems, and we’ll put the installed price in writing before any work starts. Most Boca Raton homeowners discover a Cambria part has failed after a heavy rain, when water stains appear on the ceiling, or when they notice lifted ridge caps from the street after a storm rolls through.

Call (754) 254-8065

Which Cambria Models This Applies To

Cambria entered the roofing market through partnerships with engineered roofing system manufacturers rather than producing shingles directly, so “Cambria roofing” in Boca Raton most often refers to the Cambria Stone-Coated Steel Roofing System or the Cambria Architectural Shingle lines specified in higher-end builds from 2015 to 2022. The stone-coated steel panels carry a stamped model prefix - CSC for the classic profile or CST for the tile-look variant - followed by a four-digit batch code that tells us the gauge (typically 26-gauge Galvalume substrate) and the stone granule spec. The architectural shingle line uses a CAM- prefix with a year code; CAM-18, for example, denotes the 2018 formulation with the heavier fiberglass mat.

To identify your exact part, check the under-eave stamp on steel panels or the cellophane strip on shingle bundles if you have leftover stock. If those are gone, we measure the exposure width (steel panels are 42 inches; shingles are 39 3/8 inches) and the fastener pattern - the steel system uses concealed clips at 24 inches on center, while the shingle line uses a standard four-nail pattern with a 5 5/8-inch reveal. OEM Cambria parts carry a ten-year full warranty and match the granule color exactly; quality aftermarket equivalents from Decra or Metro save 15-20 percent and carry comparable material warranties, though color matching to weathered panels requires a sample. We carry both on every roofing truck.

Signs Your Cambria Roofing Is Failing

• Granule loss exposing the fiberglass mat. Cambria’s stone-coated steel sheds granules when the acrylic bond layer breaks down under UV, which accelerates in Boca Raton’s 90-plus summer days. Once the mat shows, water migration is 18-24 months away at most.
• Lifted or missing ridge caps at the peak. The foam closure strips beneath Cambria ridge caps compress over five to seven years in Florida heat, letting wind get purchase. We see this first on east-facing ridges in Boca Raton, where morning sun heats the metal fastest.
• Rust streaks from fastener heads or panel edges. Cambria’s Galvalume coating resists salt corrosion, but fastener washers fail at the ten-year mark near the coast. If you see orange staining from the eaves, the fasteners are bleeding and the panel seal is compromised.
• Interior ceiling stains after wind-driven rain. This usually traces to a failed foam vent seal or a cracked batten cover on the stone-coated steel system, not the panel itself. The water runs the batten channel and drips at the low point.
• Sagging between battens on steel panels. The 26-gauge substrate is rated for 24-inch spans, but if the original installer stretched to 30 inches or the purlins have bowed, the panel oil-cans and the stone coat cracks at the stress point.

Before

After

Replacement Cost & What’s Included

In Boca Raton, Cambria-compatible roof repair runs $400-$1,800 depending on how many panels or shingles need replacement and whether the underlayment is salvageable. Full replacement with Cambria stone-coated steel or equivalent architectural product falls in our standard $8,000-$20,000 range, driven by roof pitch (steeper means more labor), single-story versus two-story access, and whether we need to replace the battens or can reuse the existing grid. Every quote is a flat price with a written scope - under Clause 1 of the Haven Standard, the number you agree to is the number you pay, and no change proceeds without a signed change order.

What’s included: removal and disposal of failed material, matching replacement panels or shingles, new fasteners and foam closures, underlayment repair as needed, and a documented photo record of the substrate condition before we cover it. The 365-Day Done Right Promise covers the installation; material warranties run ten years on OEM Cambria and comparable on quality aftermarket equivalents.

DIY or Call Us?

There’s a safe middle ground here. A homeowner can walk the perimeter with binoculars, note the ridge cap condition, and check the attic for daylight through the panel seams - that’s useful intelligence and carries no risk. What we don’t recommend: climbing a stone-coated steel roof (the granule surface is slick when dew-wet, and the 26-gauge panels dent under a kneeling knee), removing ridge caps to inspect foam closures, or replacing individual panels. The concealed clip system requires a specific sequencing - unhook from the uphill side, slide out, slide in - and one misaligned clip voids the wind warranty. The fasteners are also torqued to a specific inch-pound spec; over-torque cracks the washer, under-torque leaks in the first storm.

If you’re seeing any of the five symptoms above, call (754) 254-8065. We’ll schedule a free estimate, put the scope and price in writing, and if you have a competitor’s quote already, we’ll review it line by line at no charge.

FAQs