Kohler Windows & Doors Nationwide

Kohler Windows & Doors: The Boca Raton Owner’s Guide

We stock and install Kohler-compatible windows and doors in Boca Raton, with most replacement projects running $4,500-$15,000 for window replacement and $8,000-$25,000 for impact window installation depending on series and opening count. Many homeowners first realize something’s wrong when the sash won’t stay open on its own, or when they feel Atlantic humidity pushing through what used to be a sealed frame. In Boca Raton’s salt-air environment, we’ve seen Kohler hardware corrode faster than inland specs suggest, particularly on east-facing exposures.

Call (754) 254-8065

Which Kohler Models This Applies To

Kohler’s window and door portfolio spans several product families, and matching the right part starts with the label. Look for a stamped metal tag on the hinge side of the frame or a vinyl-etched code in the glass corner, typically reading K-TX, K-VX, or K-IMPACT followed by a four-digit year code. The TX series uses a 2-1/4 inch jamb depth with integral nailing fin, while the VX retrofit line carries a 3-1/4 inch pocket designed for stucco returns common in Boca Raton’s 1980s-2000s housing stock.

We source OEM Kohler hardware and weatherstrip from Kohler’s distribution network, but for certain components, we also specify truth-equivalent operators and AmesburyBrown seals that meet the same DP-50 pressure rating at roughly 30 percent less lead time. The compatibility gotcha: post-2019 Kohler frames switched from a mortised sweep lock to a surface-mounted cam lock, and the hole spacing differs by exactly 3/8 inch. We’ve seen homeowners order the wrong latch set twice before calling us to sort it. Rowan Construction Group Boca Raton is an independent service provider, not affiliated with Kohler.

Signs Your Kohler Windows & Doors Is Failing

• Sash drops or won’t stay open. The coil balance assembly has lost tension, usually from corrosion in the shoe channel. In Boca Raton, salt accumulation in the track accelerates this; we replace the balance and flush the channel as one job.
• Visible moisture between glass panes. The insulated glass unit (IGU) seal has failed, breaking the argon fill. Once fog appears, the thermal performance is gone, and the pane assembly needs replacement, not repair.
• Frame corner gaps or sealant separation. Expansion cycling in Florida heat degrades the corner keys and butyl seal. We check for square, reseat the frame, and replace the sealant with a UV-stable silicone compatible with Kohler’s vinyl formulation.
• Hardware operates with grinding or resistance. The operator gears have stripped or the hinge pin has galled. Continuing to force it will oval out the mortise, turning a $180 operator replacement into a $600 frame repair.
• Air infiltration at the meeting rail or sill. The pile weatherstrip has compressed past recovery or the interlock is out of adjustment. We stock the correct .270-inch backing width for Kohler’s 2008-2017 production run, which differs from the .187-inch used before and after.

Before

After

Replacement Cost & What’s Included

For Kohler window and door replacement in Boca Raton, our installed pricing aligns with the local market: window replacement at $4,500-$15,000 and impact window installation at $8,000-$25,000, with the spread driven by opening count, floor height (second-story requires scaffolding or pump staging), and whether the existing frame is square within 1/4 inch. A typical three-bedroom home with twelve openings lands near $11,000 for standard replacement or $16,000 for impact-rated.

Every quote is a flat written price with line-item parts and labor, delivered before work starts, under Clause 1 of the Haven Standard. We pull permits through Palm Beach County Building Division, pass inspection, and back the installation with our 365-Day Done Right Promise. The documented photo record, included standard, shows frame condition before, rough opening after removal, and final sealant application.

DIY or Call Us?

There’s a safe middle ground. Homeowners can verify the model tag location, measure rough opening width and height at three points each, and photograph any water staining on the interior trim, which tells us whether the failure is the unit, the flashing, or both. What we don’t recommend: removing a fixed sash or operating a stripped operator with force. The balance assembly on a double-hung unit stores significant tension, and an uncontrolled release can damage the frame or cause injury.

We’ve also seen DIY sealant jobs trap moisture behind the bead, rotting the sill in eighteen months. If you’re seeing multiple symptoms or any frame distortion, call (754) 254-8065. We’ll schedule a free estimate, bring the correct Kohler-compatible parts to measure against, and give you a written price before any work starts. Measure twice, document everything, then build.

FAQs