Moen Roofing Nationwide

Moen Roofing: The Boca Raton Owner’s Guide

We stock and install Moen-compatible roofing components in Boca Raton, with most replacements running $400-$1,800 installed depending on the assembly size and access difficulty. Our trucks carry common Moen flashing kits, vent collars, and drainage adapters for same-day resolution when the failure is straightforward. Most Boca Raton homeowners discover the problem during our heavy summer rains, when water shows up at a ceiling seam that was dry for years.

Call (754) 254-8065

Which Moen Models This Applies To

Moen’s roofing line is narrower than their plumbing catalog, which is why compatibility errors happen. The components we see in Boca Raton fall into three groups: the Moen Roof Drain series (M-100 through M-180, identifiable by the cast brass body and 2-inch or 3-inch outlet stamped on the flange), the Moen Flashing Adapter kits (FA-200 and FA-220 series, used primarily with flat membrane roofs in Spanish River Land and Boca West properties), and the discontinued Moen Vent Collar line (VC-50 and VC-75, common in 2008-2016 builds near Mizner Park).

The critical gotcha is the outlet diameter. The M-100 series ships with a 2-inch threaded outlet; the M-180 ships with 3-inch. We’ve found three competitor quotes in Boca Raton this year where the contractor spec’d the wrong adapter and the homeowner paid for a second visit. The OEM brass body runs $180-$340; we also source a quality aftermarket equivalent from Oatey with comparable flow ratings and a 10-year warranty at roughly 60% of OEM cost. Under Clause 1 of the Haven Standard, we put both options in writing with their part numbers before you choose.

Signs Your Moen Roofing Is Failing

• Standing water after rain that used to drain within an hour. The Moen drain body uses a brass casting that corrodes from the inside out in Boca Raton’s salt air; by the time you see ponding, the internal channel has narrowed by roughly 30%.
• Water stains radiating from a ceiling fixture or vent location. This typically traces to the Moen flashing adapter, where the rubber collar hardens in Florida UV and loses its seal against the membrane. The gap is often hairline and invisible from the roof surface.
• Musty odor in attic spaces or soffit areas after storms. A failed Moen vent collar allows wind-driven rain to enter the chase; in Boca Raton’s humidity, mold follows within 72 hours.
• Granule accumulation around the drain basin. If your roof is shingle-over, the Moen drain’s strainer can clog with asphalt debris, but persistent granule buildup usually means the drain body has shifted and the flange is no longer flush with the deck.
• Gurgling or slow drainage during heavy downpours. The M-series drains use a weir design that traps debris; in Boca Raton’s summer storm intensity, partial obstruction becomes complete failure fast.

Before

After

Replacement Cost & What’s Included

Roof repair in Boca Raton runs $400-$1,800 for Moen component replacement, with most single-drain jobs landing near $650-$950. The range depends on three factors: roof pitch (steeper means more safety rigging time), whether the membrane or shingles must be disturbed to access the flange, and whether the drain body has leaked long enough to degrade the roof deck beneath it.

Our written quote itemizes part, labor, and any deck repair separately. The 365-Day Done Right Promise applies: if the assembly leaks through our work within a year, we return and make it right at no charge. Every replacement includes a documented photo record of the old part condition, the new part installed, and the water test result. We pull permits when required by Boca Raton building code, which applies to any drain replacement involving structural deck repair.

DIY or Call Us?

There’s a safe middle ground. A homeowner can clear a Moen drain strainer of debris, check the visible flange for cracks, and verify that water flows freely from a hose test. What you cannot safely do is remove a roof drain body that is sealed to the membrane or cut into the roof deck to assess hidden corrosion. The fall risk on even a single-story Boca Raton roof is real, and disturbing the membrane without the proper heat-weld or adhesive technique voids whatever warranty remains.

We offer a free second opinion on any written estimate you’ve already received, line by line, with no obligation to hire us. Call (754) 254-8065 to schedule your free estimate.

FAQs