Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Windows & Doors: The Boca Raton Owner’s Guide
We stock and install CertainTeed-compatible windows and doors across Boca Raton, with typical installed replacement costs running $4,500-$15,000 for window replacement and $8,000-$25,000 for impact window installation depending on series and opening count. Most CertainTeed parts we carry on the truck, and we can usually inspect and quote same-day. Boca Raton homeowners usually discover the problem when a south-facing window won’t stay open, a patio door drags on the track, or they feel the Atlantic humidity pushing through a failed weatherstrip during summer storms.
Which CertainTeed Models This Applies To
CertainTeed’s window and door lineup changed significantly after their 2013 acquisition of Mi Windows and Doors, so the part you need depends on whether your unit was manufactured under the original CertainTeed brand or the post-acquisition Mi-CertainTeed series. Pre-2013 units often carry a gold-and-blue label inside the frame jamb with a 6- to 8-digit serial starting with “CT”; post-2013 units use Mi’s format with a 2-letter plant code followed by numbers. The Boca Raton market has both, since the 2004-2012 building boom installed thousands of original CertainTeed vinyl double-hungs in communities like Boca Isles and Woodfield Country Club.
We match parts by three measurements: the visible glass dimensions, the frame depth (typically 2-5/8″, 3-1/4″, or 4-9/16″ for impact-rated units), and the balance system type. Constant-force coil balances on older CertainTeed units are not interchangeable with the block-and-tackle systems Mi standardized later. For hardware, we stock Truth EntryGard and AmesburyTruth equivalents that fit the original mounting patterns; for sash balances, we use OEM-spec coils where possible because aftermarket constant-force springs in Florida’s UV exposure tend to lose tension 30-40% faster. If your label is missing, we photograph the balance shoe, pivot bar, and keepers, then cross-reference to the CertainTeed service manual.
Signs Your CertainTeed Windows & Doors Is Failing

- The sash drops or won’t stay open. This usually means the constant-force balance coil has snapped or unwound from its carrier. In Boca Raton’s salt air, the galvanized coating on pre-2010 coils corrodes faster than inland specs, so we see this most on east-facing units within three miles of the coast.
- Visible moisture between glass panes. The insulated glass unit (IGU) seal has failed, allowing humid Atlantic air to enter the airspace. Once the desiccant saturates, the fog becomes permanent; the fix is IGU replacement, not defogging.
- The patio door drags, jumps, or requires shoulder force. The tandem roller assembly has flat-spotted or the stainless track has corroded. CertainTeed’s original nylon rollers degrade in UV; we upgrade to stainless tandem rollers with Delrin wheels on replacement.
- Drafts around the frame perimeter even when closed and locked. The compression weatherstrip has taken a set after years of heat cycling, or the interlock seal between sashes has shrunk. Florida’s 90-degree daily swings harden EPDM faster than northern climates.
- Crank handle spins without moving the sash on casement units. The operator gearbox has stripped, typically because owners forced the mechanism against a warped frame. The CertainTeed-branded Truth operator uses a 9/16″ spline; aftermarket operators with 5/8″ splines will mount but strip immediately.
Before
AfterReplacement Cost & What’s Included
For CertainTeed window replacement in Boca Raton, our installed range is $4,500-$15,000 depending on unit count, series, and whether impact-rated glass is required per Florida Building Code. Single IGU replacement on a standard double-hung runs toward the lower end; full-frame replacement with impact glass on a coastal property runs higher. Patio door roller and track replacement typically falls between $400-$1,800 installed, depending on whether the sill cap and threshold need replacement.
Every quote is flat and written before work starts, per Clause 1 of The Haven Standard. The price includes parts, labor, disposal of the old unit, and a documented photo record of the condition we found and what we installed. Our 365-Day Done Right Promise covers the installation and workmanship; manufacturer warranties on CertainTeed-compatible parts pass through as written. No change order gets signed without your signature, which is how we’ve kept 4,000-plus projects within a few percent of the original number.
DIY or Call Us?

There’s a safe middle ground here. A homeowner can check the label location, photograph the hardware, and confirm the symptoms we’ve described above. What we don’t recommend: removing a sash with constant-force balances without the proper winding tool, because an uncontrolled coil can release with enough force to lacerate a hand or launch across the room. We’ve seen it happen. Similarly, impact-rated IGU replacement requires temporary opening protection that meets Florida code; a tarp does not qualify.
Measure twice, document everything, then build. If you’ve got the label photo and symptom list, call us at (754) 254-8065 and we’ll tell you whether it’s a truck-stock part or a factory order. The estimate is free, and we bring the documentation with us.
FAQs
Vinyl frames typically last 20-30 years, but the moving parts fail sooner in Florida’s climate. Coastal properties within two miles of the Atlantic often see balance and weatherstrip issues at 12-15 years due to salt and UV exposure. Call (754) 254-8065 for an exact assessment of your unit’s condition - estimates are free.
Some hardware can be lubricated or shimmed temporarily, but failed IGUs and broken balance coils require replacement parts. We don’t charge to inspect and tell you which category you’re in. Call (754) 254-8065 to schedule a look.
Single-part replacement like a balance or roller takes 1-2 hours on site. Full window replacement runs a half-day per opening for standard sizes, longer for impact-rated custom units that require permit verification. We schedule only after the written quote is accepted, so you know the timeline before we arrive.
We carry Truth hardware, constant-force and block-and-tackle balances, tandem rollers, and common weatherstrip profiles. Series-specific sashes and IGUs we order to measurement after inspection. If it’s truck stock, we fix it the same visit; if it’s factory, you’ll know the lead time before we leave. Call (754) 254-8065 to schedule your free estimate.
We also stock and install parts for KraftMaid cabinetry, Cambria and Silestone countertops, among fifty-plus vetted brands in our sourcing network. Rowan Construction Group Boca Raton is an independent service provider and is not affiliated with CertainTeed Corporation.
Written by Grant Rowan, Owner, Rowan Construction Group Boca Raton at Rowan Construction Group Boca Raton, serving Boca Raton and nearby areas.







Before
After
Before
After
Before
After