Boral Roofing Nationwide

Boral Roofing: The Boca Raton Owner’s Guide

Boral concrete and clay tile roofing in Boca Raton typically runs $8,000-$20,000 for full replacement and $400-$1,800 for targeted repairs, with most Boral-compatible parts available same-day through our supply chain. We stock and install Boral-compatible underlayment, battens, hip and ridge accessories, and color-matched replacement tiles for the most common profiles found in Palm Beach County. Most Boca Raton homeowners discover a Boral roofing issue after a hard rain, when water shows up in the soffit or a tile slides out of place on the rake edge; by then the underlayment has often been compromised for months.

Call (754) 254-8065

Which Boral Models This Applies To

Boral’s U.S. roofing line includes concrete profiles like Saxony, Slate, and Shake, plus clay lines such as Barcelona and Villa. The critical compatibility gotcha in Boca Raton is batten spacing: Boral concrete tiles typically require 24-inch on-center battens, while clay profiles often need 19-inch spacing, and mixing the two guarantees wind uplift failure under Florida Building Code wind zones. We identify the correct part by the stamped code on the tile underside, the profile height measured at the lock, and the original installation date, which tells us whether Boral’s pre-2016 or post-2016 fastening spec applies.

OEM Boral parts ship from their Roswell, Georgia distribution center with a 3-5 day lead time to South Florida. We also source quality aftermarket equivalents from Eagle Roofing and Westlake Royal that meet ASTM C1492 for concrete and ASTM C1167 for clay, at roughly 15-20% lower material cost. For color-matched replacement tiles on Boral roofs older than eight years, we always pull a physical sample and send it to the supplier for spectrophotometer matching; the Florida UV index shifts concrete color noticeably by year ten, and an eyeball match from a catalog reads wrong on the wall every time.

Signs Your Boral Roofing Is Failing

• Cracked or broken tiles at the hip and ridge. These take the highest wind load in Boca Raton’s easterly exposure, and the mortar bedding Boral specified pre-2018 often separates after five to seven years of thermal cycling. The underlying underlayment then bakes and cracks.
• Water staining on the soffit or fascia board. Boral tiles are water-shedding, not waterproof; the underlayment is the real roof. Staining means the felt or self-adhered membrane has failed at a penetration, valley, or tile displacement point.
• Granule accumulation in gutters from concrete tiles. Boral concrete tiles shed surface aggregate as they age; heavy granule loss indicates the cementitious body is becoming porous and will absorb water, increasing weight load and accelerating freeze-thaw damage on the rare cold night.
• Tile slippage on slopes below 4:12. Boral profiles are rated for minimum pitches; in Boca Raton we see this most often on porch roofs where a previous contractor used standard fastening on a low slope. The tiles slide, break the seal, and create a channel for wind-driven rain.
• Rust streaks from exposed fasteners. Boral’s installation manual specifies corrosion-resistant nails or screws; when standard fasteners were substituted, the rust runs stain the tile face and the fastener head deteriorates, loosening the tile.

Before

After

Replacement Cost & What’s Included

The range depends on three factors: access complexity (steep pitches or multi-story require scaffolding), whether we’re matching discontinued Boral colors that need custom blending, and the condition of the existing decking, which we assess with a documented photo record before quoting. Under Clause 1 of the Haven Standard, the written price includes all parts, labor, permit fees if required, and disposal. No work proceeds on a change until the change order is signed. Our 365-Day Done Right Promise covers the installation; manufacturer defects on Boral materials are handled through Boral’s limited warranty.

DIY or Call Us?

A homeowner can safely walk the roof for visual inspection if the pitch is moderate and the tiles are dry, but we don’t recommend it. Boral concrete tiles weigh 850-1,100 pounds per square; clay runs 600-900. Stepping wrong cracks the tile, and cracked tile on a Boral roof means underlayment exposure. Walking clay tile without distributing weight across multiple tiles is the fastest way to turn a $400 repair into a $1,800 one.

What you can check from a ladder: broken tiles visible from the eave, gutter debris type, and whether hip/ridge mortar is missing. What requires a trained technician: underlayment condition assessment, proper fastening torque for replacement tiles (over-tightened concrete tile fractures; under-tightened clay lifts in wind), and color matching under Florida’s particular light temperature. Call (754) 254-8065 for a free estimate; we’ll bring sample tiles and a written price before any work starts.

FAQs