Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterCGI Kitchen Remodeling: The Boca Raton Owner’s Guide
CGI kitchen remodeling in Boca Raton typically runs $14,000-$45,000 installed, with most projects quoted within 24 hours and cabinetry arriving in 4-6 weeks depending on the CGI series selected. We stock CGI-compatible hardware, drawer systems, and door fronts on our trucks for same-day adjustments when a component fails during or after installation. Most Boca Raton homeowners discover a CGI part is failing when soft-close hinges lose tension, drawer glides bind in the humidity, or a door front delaminates at the edge where the coastal salt air accelerates the separation.
Which CGI Models This Applies To
CGI cabinetry breaks into three main series that we see in Boca Raton homes: the Builder Series (entry-level framed construction), the Designer Series (semi-custom with 3/4-inch plywood boxes), and the Signature Series (full custom with dovetail drawer boxes and hardwood face frames). The part you need depends on which series is installed, and the fastest way to identify yours is the interior label sticker, usually found on the hinge side of the upper cabinet box or the back panel of a base cabinet. It lists the SKU, date of manufacture, and series code.
The OEM part from CGI will match the finish and hole pattern exactly, but we also source quality aftermarket equivalents from Blum and Salice for hinges, and KV or Accuride for drawer glides when the original lead time stretches past what a working kitchen can tolerate. The gotcha in Boca Raton’s market is that CGI’s older Designer Series (pre-2019) used a 35mm cup hinge with a unique overlay spec that standard Blum plates do not match without a conversion bracket. We keep those brackets in stock. If your cabinets were installed during the 2015-2018 building boom in West Boca or near Mizner Park, check that series date before ordering anything online.
Signs Your CGI Kitchen Remodeling Is Failing
- Soft-close hinges slam or squeak. The hydraulic cylinder inside the hinge has lost its nitrogen charge, usually from repeated heat cycling in south Florida garages where cabinets are often staged before install. The hinge still holds the door, but the damping is gone and the metal pin will wear faster without that cushion.
- Drawer glides stick or rack sideways. The ball-bearing race has collected kitchen grease mixed with the fine calcium dust that blows through Boca Raton during dry season. The drawer box then torques against the glide, bending the stamped steel bracket until the slide fails completely.
- Door front delaminates at the edge or corner. The thermofoil or wood veneer separates from the MDF substrate where the coastal humidity has broken down the PVA adhesive over 5-7 years. This is not cosmetic; moisture ingress accelerates once the seal is breached.
- Adjustable shelf pins wallow out their holes. The 5mm hole in the particleboard side panel enlarges from repeated loading, especially in pantries where homeowners store heavy small appliances. The shelf tilts, and the pin eventually pulls through.
- Base cabinet toe-kick swells or detaches. The thin MDF skin absorbs mop water or minor leaks from the dishwasher valve, common in Boca Raton’s older Spanish Lakes or Boca Del Mar homes with original copper supply lines. The clip fasteners then lose purchase in the swollen fiberboard.
Before
AfterReplacement Cost & What’s Included
| Service | Price Range in Boca Raton |
|---|---|
| CGI hinge replacement (per door, OEM) | $45-$85 |
| CGI hinge replacement (aftermarket equivalent) | $35-$65 |
| Drawer glide pair (full-extension soft-close) | $120-$220 |
| Door front replacement (per door, matched finish) | $180-$340 |
| Adjustable shelf pin repair (reinforced insert) | $25-$45 per hole |
| Toe-kick replacement (linear foot) | $30-$55 |
| Full kitchen remodel with CGI cabinetry | $14,000-$45,000 |
What drives the range: finish matching (CGI’s older colorways like “Biscotti” and “Espresso Glaze” have been discontinued), access to the cabinet box, and whether the repair exposes adjacent damage we document before closing up. Every repair quote is a flat written price with parts and labor itemized, and the 365-Day Done Right Promise applies to the fix, not just full remodels. Under Clause 1 of the Haven Standard, that price is locked before anyone picks up a tool.
DIY or Call Us?
What you can safely check: confirm the series from the interior label, measure the hinge cup diameter with a tape measure (35mm is standard), and photograph the failing part from multiple angles so we can match it before driving out. What goes wrong with DIY: the pre-2019 Designer Series overlay bracket we mentioned above, stripped screws in the MDF face frame that require a threaded insert, and the reality that a single misaligned hinge will rack the door until the corner contacts the frame, ruining the finish. We have also seen homeowners crack a drawer front by forcing a bound glide rather than cleaning the race first. If the repair involves anything more than swapping a shelf pin, call (754) 254-8065 and we will schedule a free estimate with the exact parts on the truck.
FAQs
Expect 15-20 years for the Designer and Signature Series if the kitchen is conditioned year-round; the Builder Series often shows hinge and glide wear at 8-12 years due to lighter hardware specs. The salt air and humidity cycling in Boca Raton accelerates edge delamination and metal corrosion compared to inland Florida markets. Call (754) 254-8065 for an exact condition assessment - estimates are free.
Sometimes: a wobbling shelf pin hole can be reinforced with a hardwood dowel and re-drilled, and a sticky glide race can be cleaned and re-lubricated if the bearings are not yet brinelled. Delaminated door fronts and failed hinge dampers are replacement-only; the adhesive bond and hydraulic seal cannot be restored in the field. We will show you both options with a written price for each before you decide.
Most single-component replacements - hinge, glide, shelf pin - take 45 minutes to 90 minutes on site if we have confirmed the part beforehand. Door front matching adds a second visit once the finish sample is approved. Full kitchen remodels with CGI cabinetry run 4-8 weeks from demolition to final walkthrough in Boca Raton, depending on permit timing with the city and the complexity of electrical or plumbing relocation.
We stock Blum, Salice, KV, and Accuride equivalents that fit CGI’s standard specs, plus the pre-2019 overlay conversion brackets specific to older Designer Series installs in this market. For color-matched door fronts or discontinued finishes, we order from CGI’s distribution center in Lakeland with a 2-3 week lead time, or source from our secondary vendors KraftMaid, Cambria, and Silestone if a full replacement makes more sense. We confirm availability before we schedule.
Rowan Construction Group Boca Raton is an independent service provider and is not affiliated with CGI. We also stock and install parts for KraftMaid, Cambria, and Silestone product lines.
Ready to fix the part or price the full kitchen? Call (754) 254-8065 to schedule your free estimate. We will bring the written price, the photo documentation, and the exact hardware match - measure twice, document everything, then build.
Written by Grant Rowan, Owner, Rowan Construction Group Boca Raton at Rowan Construction Group Boca Raton, serving Boca Raton and nearby areas.