CGI Fence Installation Nationwide

CGI Fence Installation: The Boca Raton Owner’s Guide

CGI fence installation in Boca Raton typically runs $3,500-$9,000 for a complete vinyl system, with most residential projects falling in the $4,800-$6,500 range depending on linear footage and soil conditions. We stock CGI-compatible posts, rails, pickets, and gate hardware for same-day replacement of failed components. Most Boca Raton homeowners discover a problem when a gate sags and won’t latch, a post leans after a storm, or they notice UV whitening on pickets that were installed before 2015.

Call (754) 254-8065

Which CGI Models This Applies To

CGI, or Custom Gate Installations, produces vinyl fencing across several series lines that have been distributed in South Florida since the early 2000s. The most common in Boca Raton are the Estate series (6-foot privacy with reinforced bottom rail), the Hampton series (4-foot scalloped picket), and the commercial-grade Sentinel series (8-foot with steel-insert posts). To identify your model, check the inside of the bottom rail for an embossed date code and series stamp, or measure the wall thickness of a picket: Estate uses 0.135-inch virgin vinyl, while Hampton runs 0.125-inch and lacks the internal ribbing.

We source OEM CGI components through authorized Florida distributors in Pompano Beach and Fort Myers, and we also stock quality aftermarket equivalents from Bufftech and CertainTeed when the original series has been discontinued. The aftermarket decision matters for color matching: CGI’s “Boca White” from 2010-2018 carries a slightly warmer undertone than current production, and we’ve learned to verify against a physical sample rather than a catalog swatch. For gates over 48 inches wide, we specify steel-insert posts regardless of original spec, because the sandy loam in neighborhoods like Woodfield Country Club shifts seasonally and will torque a hollow vinyl post within two years.

Signs Your CGI Fence Installation Is Failing

• Gate sagging or misaligned latch. The steel or aluminum gate frame has twisted at a corner joint, or the hinges have pulled their screws from a post that wasn’t set with a wood or composite insert. In Boca Raton’s humidity, untreated pine inserts rot from the inside out, so the hinge appears tight until the gate weight reveals the failure.
• Post leaning after routine storms. The concrete footing has cracked or the post itself has sheared at ground level. CGI posts installed before 2010 often used a thinner wall section at the base, and the salt-air corrosion on any internal steel sleeve accelerates the weak point.
• Rails popping out of routed posts. Thermal expansion in direct sun exceeds the snap-lock tolerance of older CGI rail brackets. We see this most on west-facing spans in Boca Raton, where afternoon surface temperatures on dark-colored vinyl can reach 165°F.
• UV whitening or surface chalking. The titanium dioxide UV barrier has degraded, which happens faster in South Florida than the manufacturer’s inland ratings predict. Once chalking begins, the vinyl becomes brittle and will crack under impact rather than flex.
• Bottom rail collecting water or detaching. The drainage holes have clogged with organic debris, or the rail was installed without the required 2-inch ground clearance. In Boca Raton’s summer downpours, a flooded rail adds 8-12 pounds per linear foot and eventually separates from the pickets.

Before

After

Replacement Cost & What’s Included

For a complete CGI fence installation in Boca Raton, expect $3,500-$9,000 depending on linear footage, access for equipment, and whether we encounter old concrete footings that need extraction. Single-component repairs run lower: a gate rebuild with steel frame and hardware typically falls between $650-$1,400, while post replacement with proper footing starts around $380 per post.

What drives the range: soil conditions in eastern Boca Raton near the Intracoastal often require deeper footings to reach stable substrate, and HOA communities like Royal Palm Yacht & Country Club may specify exacting height or color requirements that limit material sourcing. Every quote we deliver is a flat written price with line-item breakdown, and under Clause 1 of the Haven Standard, that number is fixed before any work begins. Our 365-Day Done Right Promise covers both parts and labor, and every visit includes a documented photo record of the existing condition, the repair process, and the finished installation.

DIY or Call Us?

There’s a safe middle ground for homeowners who want to assess the situation before calling. You can check whether a gate hinge screw has simply backed out, clear debris from bottom rail drainage holes, or verify that a post cap hasn’t just lifted off and allowed water intrusion. What we don’t recommend: attempting to reset a leaning post without knowing whether underground utilities run through the footing zone, or trying to tension a sagging gate frame without understanding how the diagonal bracing transfers load.

Vinyl fence components are lighter than steel or wood, but a 6-foot privacy panel still carries enough mass to injure someone if it detaches during handling. And in Boca Raton, any excavation deeper than 12 inches requires a utility locate through Sunshine 811, which takes two business days. If you’re unsure whether the failure is cosmetic or structural, call us at (754) 254-8065 and we’ll schedule a free estimate with a written price before any work starts.

FAQs