Jerith Fence Installation Nationwide

Jerith Fence Installation: The Boca Raton Owner’s Guide

Jerith aluminum fence installation in Boca Raton typically runs $3,500-$9,000 for a complete residential system, with most single-family lots in neighborhoods like Boca Woods or near Spanish River Park falling in the $4,500-$6,500 range. We stock Jerith-compatible posts, rails, and hardware on our trucks, and under Clause 1 of the Haven Standard, every project gets a written price before anyone digs the first post hole. Most Jerith owners realize they need help when panels start leaning after a storm, gates sag and drag, or the powder-coated finish chalks and exposes raw aluminum to Boca Raton’s salt air.

Call (754) 254-8065

Which Jerith Models This Applies To

Jerith makes three residential aluminum fence series, and the parts are not interchangeable across lines. The Classic series uses 1-inch square pickets with a .065-inch wall thickness; Regency steps up to 1-inch pickets with a heavier .080-inch wall and a more ornate rail profile; Ovation is the commercial-grade line with 1.5-inch pickets and .100-inch walls. Check the stamped label on the inside face of an end post, usually 8-12 inches above grade, for the series code and production date. Pre-2018 Classic posts used a slightly narrower 2-inch rail bracket that will not accept current replacement rails without shimming, a compatibility gotcha we see on older Boca Raton installations near Lake Boca Raton.

We source OEM Jerith parts through their regional distributor in Fort Lauderdale, but we also carry quality aftermarket equivalents for common failures: stainless steel self-tapping screws (Jerith’s standard zinc-plated screws last 6-8 years in coastal Florida before corrosion sets in), heavy-duty adjustable gate hinges, and reinforced post caps that shed water better than the original snap-fit design. For powder-coat touch-ups, we use matching Jerith factory paint rather than generic aluminum spray, because the UV stabilizers in their formulation hold color for 10-plus years versus 2-3 for off-the-shelf products.

Signs Your Jerith Fence Installation Is Failing

• Gate sag or drag. The gate frame has twisted or the hinge bolts have wallowed out the aluminum post holes. Jerith gates over 48 inches wide need a center drop rod or adjustable cable tensioner; without it, the weight eventually pulls the frame out of square.
• Loose or missing pickets. The punched tab that locks the picket into the top rail has fatigued, or the rail itself has bowed from thermal cycling. Boca Raton’s afternoon heat spikes to 90°F-plus while overnight lows dip to 70°F; that 20-degree daily swing stresses aluminum repeatedly.
• White chalking or color fade. The polyester powder coat has UV-degraded, exposing the aluminum substrate. Once chalking starts, the metal oxidizes faster, especially within a mile of the Intracoastal where salt spray accelerates the process.
• Post movement or lean. The concrete footing has cracked from root intrusion, poor drainage, or insufficient depth. Jerith specifies 30-inch minimum depth in sandy soils, but we’ve found posts set at 24 inches in older Boca Raton installations that heave during wet seasons.
• Rail separation at the bracket. The screw holes have stripped or the bracket itself has cracked from impact or overtightening. Jerith’s two-piece rail bracket design is forgiving, but repeated disassembly for landscaping or irrigation work wears the connection.

Before

After

Replacement Cost & What’s Included

For a complete Jerith fence installation in Boca Raton, expect $3,500-$9,000 depending on linear footage, access conditions, and whether we’re removing an old system. A partial repair, replacing 2-3 posts and a gate on an otherwise sound fence, typically falls between $1,800 and $3,200. Here’s how the numbers break down:

Every quote is a flat price with written scope. If we find rotted wood fence posts hidden inside an aluminum sleeve, or irrigation lines in the post hole path, we stop, photograph the condition, and write a change order before proceeding. No surprises, no verbal approvals. The 365-Day Done Right Promise covers the installation; Jerith’s 20-year residential warranty covers the aluminum itself against structural failure.

DIY or Call Us?

There’s safe checking, and then there’s work that needs a crew with the right tools.

What you can do: verify the series from the post label, measure gate width and post spacing with a tape measure (Jerith panels are nominal 6-foot centers but actual rail length is 70.5 inches), and check whether the problem is a loose screw or a bent bracket. Tightening a rail bracket with a #2 Phillips driver is reasonable. Digging a 30-inch post hole in coral rock or hitting a buried FPL service line is not.

What goes wrong fast: gate frames are tensioned assemblies; remove the wrong bolt and the frame springs out of square. Post holes in Boca Raton often hit limestone at 18 inches, and a rented auger will not cut it. Most importantly, aluminum conducts electricity; fence posts within 10 feet of overhead lines need bonding and grounding per Florida Building Code, and that requires a licensed electrician on the permit. We pull the permit, call the locate, and bring the breaker bar for the rock. Call (754) 254-8065 and we’ll schedule a free estimate with a written price.

FAQs