Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Windows & Doors: The Boca Raton Owner’s Guide
Boxabl-compatible window and door replacement in Boca Raton typically runs $450-$1,200 per opening installed, depending on whether we’re matching a standard Casablanca series slider or sourcing a custom-fit unit for an early-production Boxabl Casita. We stock common Boxabl window sizes on our trucks and can usually measure, order, and install within 48 hours for standard units, or same-day if the failure is a security or weather-seal emergency. Most Boca Raton owners discover the problem when they feel salt-air draft around the frame perimeter, notice condensation between the glass layers after a humid week, or find the locking hardware has seized after the unit settled past its factory shimming tolerance.
Which Boxabl Models This Applies To
Boxabl has shipped two primary window and door configurations since 2020, and knowing which one you own determines whether we pull from stock or custom-order. The Casablanca series (2020-2023 production) used a 36-inch by 60-inch fixed picture window paired with a 30-inch by 80-inch steel entry door with integrated blind, both set into a vinyl nail fin designed for modular crane-set installation. The Casita 375 (2023-present) shifted to a 48-inch by 48-inch awning-style venting window and a 32-inch by 80-inch fiberglass door with multi-point locking hardware, using a block-frame installation that tolerates more settling but is harder to retrofit without disturbing the exterior finish panel.
The label is your fastest identifier: Casablanca units carry an “A” prefix on the window spacer bar (visible when you open the sash), while Casita 375 units use a “C3” code. If the label is painted over, which we see often in Boca Raton’s older Boxabl deliveries, measure the daylight opening and the frame depth; Casablanca frames are 3.25 inches deep, Casita frames are 4.5 inches to accommodate the thicker wall assembly. We are an independent service provider, not affiliated with Boxabl, so we source both OEM parts through Boxabl’s parts channel and quality aftermarket equivalents from manufacturers like PGT and CGI that meet Florida Product Approval for HVHZ (High Velocity Hurricane Zone) requirements. For Boca Raton’s coastal exposure, we typically recommend the aftermarket equivalent with laminated impact glass; the OEM unit is adequate inland, but we’ve seen seal failure accelerate within three years when salt spray sits on standard IG (insulated glass) units near the Intracoastal.
Signs Your Boxabl Windows & Doors Are Failing

- Visible moisture or fog between glass panes. This means the insulated glass unit (IGU) seal has failed, which is common in Boca Raton’s climate where daily thermal cycling stresses the edge sealant. Once argon or air escapes and humid outside air enters, the desiccant saturates and the view clouds permanently; the IGU must be replaced, not the whole frame.
- Draft around the frame perimeter even when closed and locked. The modular installation process relies on precise shimming and sealant; if the unit settled or the original foam backer rod degraded under UV exposure, the pressure-equalization zone fails and conditioned air escapes. We check with a smoke pencil to locate the leak path before quoting.
- Locking hardware sticks, grinds, or no longer engages the strike plate. Multi-point locks on Casita 375 units are sensitive to frame racking during transport and set; if the keepers shift even 1/8 inch, the gearbox strains and eventually strips. Early replacement saves the mechanism; waiting risks damaging the door slab.
- Exterior frame cap or trim pulling away from the wall. This is the warning that the modular attachment clips or the sealant bed has failed, which in Boca Raton’s wind-driven rain environment allows water into the wall cavity. We document this with photos and recommend addressing it before the next storm season.
- Window won’t stay open or slams shut unexpectedly. The constant-force balance spring or the friction hinge has worn; on Casablanca units, these are proprietary sizes that we order pre-calibrated, while Casita 375 units use standard hardware we stock.
Before
AfterReplacement Cost & What’s Included
For Boca Raton Boxabl owners, here is what we see in the market and what we quote in writing before any work starts:
| Service | Typical Range |
|---|---|
| Standard IGU (insulated glass unit) replacement, Casablanca series | $450-$680 |
| Impact-rated IGU upgrade, aftermarket PGT/CGI equivalent | $720-$950 |
| Full window assembly replacement, Casablanca, standard size | $890-$1,200 |
| Full window assembly replacement, Casita 375, awning style | $1,050-$1,450 |
| Entry door hardware repair/replacement (multi-point lock set) | $380-$620 |
| Full door slab and frame replacement, Casita 375 | $1,400-$2,200 |
| Sealant and flashing repair, per opening | $280-$450 |
The range depends on three factors: whether we use OEM or aftermarket glass (impact upgrade adds 30-40 percent but carries a 10-year seal warranty vs. 2 years on standard), whether the modular wall cavity needs reframing where water intruded, and whether the exterior finish panel must be removed to access the nail fin. Our quote is a flat price with a written scope; under Clause 1 of the Haven Standard, that number does not change unless you sign a change order for additional work we discover after opening the wall. Every replacement carries our 365-Day Done Right Promise, and the documented photo record shows you the before condition, the cavity inspection, and the finished installation.
DIY or Call Us?

There is one safe check any Boxabl owner can perform: open the window or door, examine the spacer bar label for the model code, and photograph any moisture pattern or frame gap for our review. What we do not recommend is removing the window or door unit yourself. Boxabl modules are structural boxes; the openings are engineered shear points, and the crane-set installation means the wall panels bear load in ways site-built framing does not. We’ve been called to Boca Raton jobs where a homeowner removed the interior trim, found no conventional studs, and compromised the modular clip system trying to shim a replacement. The repair then required reframing and exterior panel work that multiplied the cost.
The hardware is also less forgiving than conventional residential grade. Multi-point locks require sequential adjustment of the keepers; done out of order, the gearbox binds and the $400 mechanism becomes scrap. We carry the calibration gauges and the specific backer rod diameters Boxabl’s installation manual specifies. If you’re weighing the time and risk, call us at (754) 254-8065; we’ll review your photos at no charge and give you a written price before you decide.
FAQs
Standard IGUs in coastal Boca Raton typically show seal degradation in 5 to 8 years if the unit faces direct salt spray; inland Boxabl owners near Town Center see 10 to 12 years. Impact-rated laminated units last 15 to 20 years but should be inspected annually for delamination at the glass edge. Call (754) 254-8065 to schedule an inspection; estimates are free.
Fogged or cracked insulated glass cannot be repaired; the IGU is a sealed factory assembly, and breaking the seal to clean or regas it voids any warranty and restores nothing. Minor hardware issues, like a sticky lock or detached operator arm, are repairable if caught before the mechanism strips. Call (754) 254-8065 and we’ll tell you which category yours falls into.
A standard IGU swap takes 90 minutes; a full window or door assembly replacement in a Boxabl module takes 4 to 6 hours because we must protect the exterior finish panel, verify the modular clip integrity, and reseal to the manufacturer’s water-intrusion specification. We schedule one opening per day so the module is never exposed overnight. Call (754) 254-8065 for availability.
We stock the most common Casablanca and Casita 375 sizes, sealants, and hardware on our Boca Raton trucks; specialty sizes or early-production units ship in 5 to 7 business days. We confirm stock when you call and hold the part when the estimate is approved. Call (754) 254-8065 to check availability for your model code.
Rowan Construction Group Boca Raton also stocks and installs parts for KraftMaid cabinetry, Cambria and Silestone countertops, and other major brands across our seven trades.
Measure twice, document everything, then build. That’s how Grant Rowan runs every crew, and it’s why we carry a documented photo record on every visit as standard.
Written by Grant Rowan, Owner, Rowan Construction Group Boca Raton at Rowan Construction Group Boca Raton, serving Boca Raton and nearby areas.







Before
After
Before
After
Before
After