Cambria Windows & Doors Nationwide

Cambria Windows & Doors: The Boca Raton Owner’s Guide

We stock and install Cambria-compatible windows and doors in Boca Raton, with most replacement projects running $4,500-$15,000 for window replacement and $8,000-$25,000 for impact window installation depending on series and opening count. Most standard-size sashes, hardware kits, and weatherstrip assemblies are on our trucks or available next-day through our distributor network. The call we get most often starts with a window that won’t stay open, a door that drags, or water pooling on the sill after a Boca Raton afternoon storm.

Call (754) 254-8065

Which Cambria Models This Applies To

Cambria’s window and door lines have shifted over the past decade, and the part you need depends on the generation. Pre-2018 units often carry the “Cambria Architectural” label with a stamped date code in the jamb liner; post-2018 models moved to a printed QR sticker near the lock mechanism. We see the 5000 Series vinyl double-hung and 7000 Series casement most frequently in Boca Raton’s 2015-2022 builds, particularly in communities west of Military Trail where that construction wave hit.

The critical compatibility gotcha is the cam lock spacing: early 5000 Series used a 2-3/8″ center-to-center hole pattern, while the revised 5000-R (2019 onward) shifted to 2-1/2″. Measure before ordering. We source OEM Cambria hardware through our distributor, but for weatherstrip and balance assemblies we often spec AmesburyTruth aftermarket equivalents that match the OEM spec at lower cost. We tell you which we’re proposing and why, and the quote breaks both options out line by line.

Signs Your Cambria Windows & Doors Is Failing

• Sash won’t stay up or slams shut. The coil balance assembly has lost tension or the pivot bar has worn. In Boca Raton’s humidity, we’ve seen balance springs corrode faster than the manufacturer’s 10-year spec suggests, particularly on west-facing units.
• Visible water on the sill after rain. The weatherstrip compression seal has flattened or the weep holes are clogged with salt and pollen. Left unaddressed, this migrates into the wall cavity.
• Door sticks or drags at the threshold. The adjustable sill cap has settled, or the hinge screws have backed out of the composite frame. Sometimes it’s foundation movement; we check with a level before assuming the door is at fault.
• Fog between glass panes. The insulated glass unit (IGU) seal has failed. This is not repairable; the IGU gets replaced as a sealed assembly. We measure the daylight opening and order to the exact 1/8″.
• Lock mechanism turns but doesn’t engage. The multi-point lock gearbox has stripped, usually from forcing the handle while the door is warped or misaligned. Forcing it harder destroys the keepers in the frame.

Before

After

Replacement Cost & What’s Included

For a single failed component on an otherwise sound Cambria unit, expect $180-$450 for hardware or balance replacement, $350-$800 for IGU replacement, and $600-$1,400 for full sash replacement including removal and disposal. Full window replacement runs $4,500-$15,000 depending on count, series, and whether you’re upgrading to impact-rated glass, which most Boca Raton owners choose given the HVHZ requirements.

What drives the range: unit size, floor level (second-story carries ladder/setup time), and whether the original installation used proper shimming or we’ll need to reframe. Our quote is flat and written, with parts and labor itemized. Under Clause 1 of the Haven Standard, that number does not change unless you sign a change order. Workmanship is covered by our 365-Day Done Right Promise.

DIY or Call Us?

There’s safe checking and then there’s work that belongs to someone with the right tools and liability coverage. You can verify the model label location, clear weep holes with a pipe cleaner, and confirm whether the lock issue is debris or mechanical failure. Do not attempt to remove or adjust a sash with a failed balance; the spring tension is significant and the sash can drop hard on fingers or glass. We carry the sash supports and know the release sequence for each Cambria generation.

Measure twice, document everything, then build. That’s how Grant Rowan runs every crew, and it’s why we photograph the condition before we touch anything. Call (754) 254-8065 to schedule your free estimate. We’ll bring the right parts, or tell you honestly if the unit is beyond reasonable repair.

FAQs