Cambridge Pavers Bathroom Remodeling Nationwide

Cambridge Pavers Bathroom Remodeling: The Boca Raton Owner’s Guide

We stock and install Cambridge Pavers-compatible bathroom remodeling packages in Boca Raton, with typical installed prices running $9,000-$28,000 depending on scope and material grade. Most Cambridge Pavers bathroom projects we quote include the full material takeoff, demolition, rough-in, and finish work in a single written price. If you’re seeing cracked or shifting paver surfaces in a wet-area bathroom, or moisture seeping through what should be a sealed installation, the substrate or drainage layer has likely failed beneath the finished surface.

Call (754) 254-8065

Cambridge Pavers manufactures a distinct line of permeable and non-permeable concrete pavers popular in South Florida for exterior hardscaping, and some Boca Raton homeowners have extended these materials into covered lanai bathrooms, pool-adjacent shower areas, and open-air powder rooms where humidity and salt air create conditions the original installer may not have anticipated. The failure pattern we see most often in Boca Raton starts at the bedding layer: washed shell bedding migrates over time in our sandy soils, creating voids that telegraph through as lippage or cracking in the paver field.

Which Cambridge Pavers Models This Applies To

Cambridge Pavers produces several series that appear in Boca Raton bathroom and wet-area applications, and identifying your specific line determines whether we can source matching replacement units or need to recommend a compatible alternative. The ArmorTec series, with its proprietary surface-hardening process, is the most common in residential pool bathrooms because the color runs deeper than standard through-body pavers. The Renaissance series, with its tumbled finish and larger format units, shows up in higher-end Mizner Park-area renovations where the aesthetic leans Mediterranean. The Permeable Paver series, designed for open-graded bedding, requires a completely different drainage strategy than traditional sand-set installations.

To identify your series, check the edge of any loose paver for the Cambridge logo stamp, which appears on one vertical face of most units produced after 2014. Measure the nominal dimensions: ArmorTec standard units are 4″ × 8″ × 2⅜” thick, while Renaissance 6″ × 9″ units run 2¾” thick. The critical compatibility gotcha in Boca Raton’s climate: ArmorTec pavers installed before 2019 used a slightly different color matrix than current production, so patching a failed section with new-in-box units often creates a visible banding line even within the same color name. We maintain a small stock of reclaimed 2015-2018 production in our warehouse for this exact scenario, sourced from demolition projects where the pavers were salvageable.

On OEM versus aftermarket: Cambridge Pavers does not sell direct to homeowners or independent contractors. We source through Cambridge’s authorized distribution network, primarily Coastal Building Materials in Pompano Beach, which keeps us within warranty terms. Third-party architectural pavers that match Cambridge dimensions exist, but we’ve seen color shift within 18 months on units that claimed UV stability equivalent to ArmorTec. For a bathroom installation where you’re walking on it daily, the savings rarely justify the mismatch risk.

Signs Your Cambridge Pavers Bathroom Remodeling Is Failing

• Efflorescence blooming between paver joints. White mineral deposits signal moisture moving upward through the bedding layer, carrying dissolved salts from the concrete base or shell bedding. In Boca Raton’s humid climate, this accelerates once the vapor barrier beneath the slab has compromised.
• Individual pavers rocking underfoot or sounding hollow when tapped. This indicates bedding material erosion or washout, common in open-air bathrooms where rainfall or pool splash drains across the surface rather than being directed to a dedicated channel. The void beneath the unit will expand until the paver cracks or the surrounding units destabilize.
• Joint sand washing out repeatedly despite re-sanding. If you’re adding polymeric sand every six months, water is moving through the field faster than the jointing material can set. The root cause is almost always a failed or missing edge restraint, or a slope reversal that pools water instead of shedding it.
• Surface spalling or flaking on the paver face. ArmorTec’s hardened surface layer is approximately 3/16″ deep; once it’s breached by impact or freeze-thaw cycling in unconditioned spaces, the softer body concrete erodes rapidly. Boca Raton rarely freezes, but pool chemical splash and salt air create a similar crystallization pressure in unsealed installations.
• Musty odor or visible mold at perimeter walls. Pavers are not waterproof; they’re water-managed. When the drainage plane behind or beneath the installation fails, moisture wicks into wall framing or the slab edge. We’ve found this in three Boca Raton country club renovations where the original installer omitted the required 4″ perforated drain at the slab perimeter.

Before

After

Replacement Cost & What’s Included

Bathroom remodeling with Cambridge Pavers in Boca Raton runs $9,000-$28,000 installed, with most full-gut wet-area projects we quote falling between $14,000 and $22,000. The lower end covers a compact powder room or small pool bath with straightforward access and no structural repair. The upper range includes demo to the slab, new drainage rough-in, waterproofing membrane installation, and re-laying a full Cambridge Pavers field with proper slope to a linear drain.

What drives the spread: substrate condition is the biggest variable. If we open the floor and find the original slab has no vapor barrier or the edge drain is absent, remediation adds $2,500-$4,500 before we set the first paver. Cambridge Pavers material itself runs $8-$14 per square foot for the paver units plus bedding, jointing, and sealant. We itemize every line in our written quote: demo and haul-away, substrate prep or repair, materials with series and color specified, installation labor, and final seal coat. Under Clause 1 of the Haven Standard, that written price is fixed; if we missed something in our site assessment, we absorb it. No change proceeds without a signed change order, which is the discipline that has kept our projects within a few percent of the agreed number across 4,000-plus jobs since 2007.

The 365-Day Done Right Promise covers the installation and workmanship. Cambridge Pavers’ own material warranty, which we register on your behalf, covers manufacturing defects for the life of the product when installed by an authorized contractor using specified materials.

DIY or Call Us?

There’s a short list of things a homeowner can safely check before calling. Verify that surface drains are clear of debris and that water flows toward them when you flood-test with a hose. Look for visible edge restraint failure, you can see the paver field creeping away from the border course. Check whether the white efflorescence wipes off with a dry cloth, surface deposits are cosmetic; if they return within 48 hours after cleaning, the moisture source is below.

Where DIY goes wrong: lifting even a single Cambridge paver to inspect the bedding requires breaking the interlock of the surrounding field, and re-establishing that interlock with proper compaction is not a hand-tool job. More critically, if your bathroom is on a slab with a failed vapor barrier, any new installation without addressing the source will fail on the same timeline. We do not recommend homeowners attempt substrate repair or drainage modification in a wet-area bathroom. The moisture damage you’re seeing is often three feet beyond the visible symptom by the time it shows at the surface.

Call us at (754) 254-8065 and we’ll schedule a free estimate. We bring a written price, not a sales pitch. Measure twice, document everything, then build.

FAQs