ES Windows Driveway & Pavers Nationwide

ES Windows Driveway & Pavers: The Boca Raton Owner’s Guide

We stock and install ES Windows-compatible driveway and paver systems in Boca Raton, with paver driveway installation typically running $7,000-$18,000 and concrete driveway installation at $4,500-$12,000 depending on substrate condition and square footage. Most ES Windows paver consultations can be scheduled within 48 hours, and we carry common matching profiles for ES Windows’ coastal-rated hardscape lines on our trucks. Most Boca Raton homeowners discover their ES Windows driveway or paver system is failing when they notice pooling after rain that didn’t happen before, or when individual pavers start rocking underfoot - signs that the bedding layer or edge restraint has degraded in our sandy, high-water-table soil.

Call (754) 254-8065

Which ES Windows Models This Applies To

ES Windows manufactures hardscape systems under several series names, and the part you need depends on which generation was installed. The Coastal Series and Impact-Rated lines are the most common in Boca Raton, where wind-load and permeability requirements are stricter than inland Florida markets. Check the edge of any existing paver for a stamped “ESW” mark and a four-digit date code - the first two digits are the year of manufacture. Pre-2019 pavers used a 60mm thickness standard; post-2019 shifted to 80mm for drive-rated applications, and the bedding sand gradation changed with it. Mixing generations in a repair creates a height mismatch that telegraphs through the finished surface.

We source OEM-matching ES Windows pavers and compatible edge restraints from Belgard and Techo-Bloc when the original profile is discontinued. The aftermarket equivalent decision hinges on whether your HOA or municipality requires exact-match documentation - some Boca Raton communities do, and we keep those records on file. Bring us a photo of the stamp mark and we’ll cross-reference the part number against our stocked inventory before we drive out.

Signs Your ES Windows Driveway & Pavers Is Failing

• Pavers rock or sink when stepped on. This means the bedding sand layer has washed out or compacted unevenly, often from irrigation runoff or poor initial screeding. In Boca Raton’s loose, sandy subgrade, this tends to start near downspout outlets where water concentrates.
• Weeds growing between joints that were previously tight. Polymeric sand degrades faster in Florida’s UV and salt-air exposure than the manufacturer specs suggest. ES Windows systems installed before 2018 used an earlier sand formula that we’ve found fails at the 4-6 year mark here, not the 10-year claim.
• Edge pavers tipping outward or separating from the field. The edge restraint - plastic, concrete, or aluminum - has lost anchoring. Our crews see this most often on the street-side edges of Boca Raton driveways, where delivery trucks and lawn equipment ride the margin.
• White haze or efflorescence on the paver surface. This is mineral migration from the bedding layer, accelerated by our frequent heavy rains and poor drainage. It’s cosmetic at first but signals moisture is moving through the system instead of draining through it.
• Cracking in concrete paver alternatives or spalling at control joints. ES Windows’ concrete paver offerings are less common in Boca Raton but appear in some 2015-2018 builds; spalling usually traces back to freeze-thaw damage or salt exposure, even in Florida where de-icing isn’t the culprit - pool chemicals and irrigation salts do similar work.

Before

After

Replacement Cost & What’s Included

For Boca Raton properties, ES Windows paver driveway replacement runs $7,000-$18,000 installed; concrete driveway replacement is $5,000-$14,000; and driveway sealing - which we recommend every 2-3 years to extend the polymeric sand life - runs $250-$700. The range depends on three factors: square footage, whether the existing base course can be salvaged (saving $2-$4 per square foot in haul-off and re-compaction), and whether your community requires engineer-stamped drainage plans.

Every quote we write itemizes the part: pavers by the square foot, bedding sand by the ton, edge restraint by the linear foot, and labor by the phase - demolition, base prep, screeding, laying, and sealing. Under Clause 1 of The Haven Standard, that written price is the price. No change proceeds without a signed change order, which is how we’ve kept 4,000-plus projects within a few percent of the original number since 2007. The 365-Day Done Right Promise covers the installation; manufacturer defects in the ES Windows material itself are handled through the OEM warranty, and we document both with your photo record.

DIY or Call Us?

An owner can safely check three things: whether the paver stamp matches the documentation, whether the rocking is isolated or widespread, and whether the drainage slope still carries water away from the garage. What you can’t safely assess is the base course condition beneath the bedding layer - it requires lifting pavers without disturbing the pattern, then probing the compacted aggregate for saturation or voiding. In Boca Raton’s high water table, we’ve found saturated bases that looked sound from above.

DIY paver relaying without proper plate compaction and gradation control usually fails within one rainy season. The tools matter: a 5,000-pound plate compactor for the base, a 1-inch screed pipe for the bedding layer, and a mason’s level checked every four feet. Most homeowners don’t own these, and rental units rarely include the vibration-dampening handles that make the work precise. For a failed ES Windows driveway or paver system, call (754) 254-8065 - we’ll photograph the substrate, write the scope, and give you the flat price before anyone lifts a paver.

FAQs