Mr-Glass Driveway & Pavers Nationwide

Mr-Glass Driveway & Pavers: The Boca Raton Owner’s Guide

We stock and install Mr-Glass-compatible driveway and paver components in Boca Raton, with typical installed replacement costs running $5,000-$14,000 for driveway replacement and $7,000-$18,000 for full paver driveway installation depending on substrate condition and square footage. Most Mr-Glass paver edge restraints, drainage channels, and expansion joint materials are available same-day through our network. Boca Raton homeowners usually discover a failure when they notice pavers shifting after heavy rain, pooling near the garage threshold, or a distinct hollow sound when walking the driveway - signs the bedding layer or edge restraint has degraded.

Call (754) 254-8065

Which Mr-Glass Models This Applies To

Mr-Glass markets its driveway and paver systems under several series lines, and the part you need depends on when your installation was completed. The Residential Permeable Series (2016-2021) uses a 4-inch polymeric edge restraint with integrated spike slots spaced every 12 inches, while the Commercial Grade Series (2021-present) shifted to a 6-inch aluminum restraint with hidden fasteners. Check the stamped code on the inside face of any exposed edge piece - a “MG-R” prefix indicates residential-grade material, and “MG-C” indicates commercial. The permeable series also used a proprietary 2-inch bedding chip that differs from standard ASTM No. 57 stone; substituting generic aggregate compromises drainage and voids the finish warranty.

We source OEM Mr-Glass edge restraints and drainage components where they’re still manufactured, and we’ve qualified two aftermarket equivalents - one from Belgard and one from Techo-Bloc - that match the slot spacing and flexural strength specs. The aftermarket route typically saves 15-20% on material cost without sacrificing performance, and we document the substitution in your written quote so there’s no surprise. If your installation predates 2016, Mr-Glass used a third-party edge system that is now obsolete; in those cases, we retrofit with current-generation components and adjust the bedding depth to match.

Signs Your Mr-Glass Driveway & Pavers Is Failing

• Pavers shifting or rotating at the perimeter. The edge restraint has cracked or pulled free from its spikes, usually from salt corrosion or freeze-thaw stress in Boca Raton’s occasional cold snaps. Left unaddressed, the pattern unravels inward.
• Standing water near the garage or walkway connection. The bedding layer has settled or washed out, often because the geotextile fabric beneath failed or the drainage channel is clogged with sediment from our sandy Palm Beach County soils.
• Hollow sound or visible rocking underfoot. The bedding material has migrated, creating voids. This happens faster in Mr-Glass permeable installations if the joint aggregate was not replenished every 18-24 months.
• White efflorescence blooming across paver faces. Calcium hydroxide is migrating through the surface, a sign that water is trapped in the base rather than draining. In Boca Raton’s humid climate, this accelerates if the original installer omitted the vapor barrier.
• Sunken or heaved sections near tree lines. Root intrusion or expansive clay in the subgrade is pushing upward. Mr-Glass systems require 6-8 inches of compacted base in these conditions; shortcuts here show up in year three or four.

Before

After

Replacement Cost & What’s Included

For Mr-Glass driveway and paver work in Boca Raton, here is how our pricing breaks down:

The spread within each range comes down to three factors: square footage, substrate condition, and access. A 400-square-foot driveway with sound concrete underneath and open side-yard access sits at the lower end. A 900-square-foot install requiring full excavation, haul-away of failed base material, and tight gate access pushes toward the top. Our quote includes demolition, disposal, base preparation and compaction to 98% Proctor density, bedding and paver installation, polymeric sand jointing, and sealer application. Under Clause 1 of the Haven Standard, you receive that quote in writing before any work starts - every line item priced, no open-ended allowances.

The 365-Day Done Right Promise covers the installation workmanship. Material defects fall to the manufacturer’s warranty, which we register on your behalf.

DIY or Call Us?

There is no high-tension danger in paver work the way there is with garage door springs or electrical panels, but there is a point where DIY becomes expensive self-teaching. A homeowner can safely inspect: check for loose spikes along the edge restraint, clear visible drainage grates of debris, and verify that joint sand is present between paver courses. If you find voids deeper than a quarter-inch or any section that has dropped more than half an inch, the fix involves plate compaction, laser leveling, and often base reconstruction - work that requires calibrated tools and an eye for drainage slope.

We have also seen well-meaning DIY repairs in Boca Raton’s Coral Lakes and Mission Bay neighborhoods where the owner added new bedding material without removing the failed layer beneath, trapping moisture and accelerating efflorescence. Measure twice, document everything, then build - that applies to diagnosis too. Call (754) 254-8065 and we will walk through what you are seeing, then schedule a free estimate if the fix is beyond a weekend project.

FAQs