Schluter Windows & Doors Nationwide

Schluter Windows & Doors: The Boca Raton Owner’s Guide

We stock and install Schluter-compatible windows and doors across Boca Raton, with most replacements quoted between $4,500 and $15,000 for full window replacement and $8,000 to $25,000 for impact-rated installations. Schluter Systems does not manufacture windows or doors directly; their building envelope products - KERDI waterproofing membranes, DITRA uncoupling membranes, and BARA and RENO edge profiles - integrate with window and door rough openings during installation or remediation. Most Boca Raton homeowners discover these components have failed when they notice water intrusion around a window frame after a summer storm, or when a tile installer opens the wall and finds the KERDI membrane has delaminated from the substrate.

Call (754) 254-8065

Which Schluter Models This Applies To

Schluter does not use a “model year” system for windows and doors because they supply the waterproofing and transition systems that interface with them. What matters for your Boca Raton project is the Schluter product line paired with your window or door assembly. The KERDI-BOARD-SN prefabricated waterproof niches and KERDI-LINE linear drains appear frequently in window-adjacent shower installations in Spanish Colonial and coastal contemporary homes near the Intracoastal. BARA-RKL balcony and terrace profiles, specified in 10 mm and 12.5 mm heights, handle the threshold transitions that fail first in Florida’s salt-air environment. RENO-TK and RENO-U profiles cover the expansion joints between dissimilar flooring materials at doorways.

To identify what you have, look for the embossed Schluter logo on aluminum edge strips, or the orange KERDI fleece backing visible at cut edges. The critical compatibility gotcha in Boca Raton: KERDI membrane must bond to unmodified thin-set mortar per Schluter’s written spec; modified mortars common in big-box stores contain latex polymers that can prevent proper adhesion in our humidity, and we’ve opened walls in Royal Palm Yacht & Country Club where the membrane pulled free because the installer used the wrong bag. OEM Schluter parts are our default; the aluminum alloys in BARA profiles are anodized to Schluter’s spec, and aftermarket equivalents we’ve tested from import suppliers showed pitting within 18 months of Atlantic exposure.

Signs Your Schluter Windows & Doors Is Failing

• Water staining on interior drywall below or beside a window. This usually means the KERDI membrane or flashing tape at the rough opening has breached, allowing Florida’s driving rain to migrate through the wall cavity. In Boca Raton’s climate, the damage accelerates once the paper facing on drywall stays wet for more than 48 hours.
• Soft or discolored subfloor at a door threshold. The DITRA membrane beneath tile may have lost its bond, or the BARA profile was installed without proper slope to the exterior. We see this in patio door conversions where the original concrete stoop was tiled over without adequate drainage planning.
• Grout cracking in a straight line parallel to a window frame. This signals movement at the structural interface; either the window buck is shifting independently of the block wall, or the DITRA uncoupling membrane was omitted during a prior remodel. The crack will widen through seasonal humidity cycles.
• Visible orange fleece at KERDI seams turning gray or black. Mold colonization on the fleece indicates bulk water has reached the membrane surface, which means the waterproofing layer behind it has already been compromised. This is common in north-facing windows that stay shaded and damp.
• BARA or RENO edge profiles lifting or becoming sharp to the touch. The profile has corroded at its fastening points, or the substrate beneath has swollen from moisture. In coastal Boca Raton, salt accumulation from ocean breezes accelerates aluminum degradation if profiles are not rinsed periodically.

Before

After

Replacement Cost & What’s Included

For Schluter-integrated window and door work in Boca Raton, our installed pricing follows the ranges below. These are flat prices with written scope, not estimates that shift once demolition begins.

What drives the range: window size, whether the existing frame is wood or aluminum (wood rot adds substrate repair), and whether the original Schluter integration was documented or must be reverse-engineered. Every quote includes the documented photo record, removal and disposal, new Schluter materials with batch numbers noted, and our 365-Day Done Right Promise. Under Clause 1 of the Haven Standard, the price is written before anyone starts; no change proceeds without a signed change order.

DIY or Call Us?

What you can safely check: verify that water is not accumulating in window tracks from clogged weep holes, and confirm that caulk joints at exterior trim are intact. These are maintenance items, not repairs.

Where DIY goes wrong: KERDI membrane installation requires a flood test - blocking the drain and filling the assembly to the top of the curb for 24 hours - to verify watertightness before tile goes back. Without this step, a homeowner in Boca Raton may complete what looks like a clean repair, only to discover the leak persists behind the wall after the first tropical downpour. The membrane is also installed with specific unmodified thin-set coverage rates (minimum 5/32″ v-notch trowel for walls) that are difficult to achieve without experience. BARA profiles at door thresholds must maintain 1/4″ per foot slope minimum; getting this wrong traps water and voids Schluter’s system warranty.

We carry KERDI membrane rolls, DITRA in standard and heat-mat configurations, and the full BARA and RENO profile inventory on our trucks. Call (754) 254-8065 to schedule your free estimate.

FAQs