Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Boca Raton Owner’s Guide
We stock and install Sterling-compatible driveway and paver components in Boca Raton, with most replacement projects running $5,000-$14,000 for full driveway replacement or $250-$700 for sealing and surface-level repairs. Parts are typically available same-day through our network of fifty-plus vetted brands, and we quote a flat written price before any work begins. Most Sterling owners in Boca Raton first notice trouble when pavers shift after heavy rain, when the surface pools water where it never used to, or when individual stones crack under the load of a standard SUV - signs that the base layer, edge restraints, or the pavers themselves have reached their limit in our sandy, high-water-table soil.
Which Sterling Models This Applies To
Sterling produces several paver and hardscape lines, and the part you need depends on whether your installation used their standard concrete pavers, permeable series, or porcelain paver systems. Check the edge of any loose paver for a stamped model code, or measure the thickness - Sterling’s residential pavers are typically 60mm, while their commercial-grade and permeable lines run 80mm. The jointing sand specification matters too: Sterling’s permeable pavers require ASTM C-144 fine aggregate, not standard mason’s sand, to maintain drainage.
We source OEM Sterling replacements where the series is still in production, and we match quality aftermarket equivalents from Belgard and Techo-Bloc when the original line has been discontinued. The aftermarket route often saves 15-25% on material without sacrificing compressive strength, provided the color batch is matched under Florida midday sun - something we verify on-site before ordering. If your driveway was installed between 2008 and 2016, check specifically for Sterling’s “Classic Cobble” series, which had a known edge-spalling issue in salt-air environments and was reformulated in 2017.
Signs Your Sterling Driveway & Pavers Is Failing

- Pavers rock or wobble underfoot. This usually means the bedding sand layer has washed out or the base compacted unevenly. In Boca Raton, our summer downpours accelerate this when joint sand is not maintained.
- Water pools in sections that used to drain. The base slope has settled or the permeable joint material is clogged with organic debris. Left alone, pooled water seeps into the sub-base and worsens the settlement.
- Cracks radiating from a single paver outward. The paver itself failed under point load, often because the base beneath it was inadequately compacted during original installation. The crack pattern tells us whether to replace one stone or address a larger base issue.
- Edge restraints pulling away from the border. Plastic or aluminum edging degrades in UV exposure; Sterling installations near the Intracoastal see faster failure from salt spray accelerating that degradation.
- Efflorescence that returns after cleaning. White mineral deposits indicate moisture moving through the paver body repeatedly. In Florida’s humidity, this signals either a drainage failure or pavers that were not properly cured before installation.
Before
AfterReplacement Cost & What’s Included
| Service | Boca Raton Price Range |
|---|---|
| Driveway Sealing (maintenance) | $250-$700 |
| Partial Paver Replacement (base intact) | $1,200-$3,500 |
| Full Driveway Replacement | $5,000-$14,000 |
| Paver Driveway Installation (new) | $7,000-$18,000 |
The spread in full replacement pricing comes down to three factors: square footage, base reconstruction depth, and whether we need to haul spoil off-site. Boca Raton’s sandy soils often require a 6-8 inch aggregate base with geotextile fabric to prevent migration, where other regions get by with 4 inches. Our quote includes the written scope, the documented photo record, and our 365-Day Done Right Promise. Under Clause 1 of the Haven Standard, the price we write is the price you pay - no change proceeds without a signed change order.
DIY or Call Us?

A homeowner can safely inspect joint sand levels, look for cracked pavers, and photograph problem areas for us. What we do not recommend is attempting base repair or paver lifting yourself. The bedding layer must be screeded to within 1/8 inch over the full plane, and in Boca Raton’s conditions, improper base prep leads to recurrence within a single rainy season. The 60-80mm pavers weigh 8-12 pounds each; a full driveway replacement is thousands of pounds of material on a tight gradient.
Measure twice, document everything, then build. We apply that same discipline to every Sterling paver job in Boca Raton: photo record before, during, and after, with each phase signed off before the next begins. Call (754) 254-8065 to schedule your free estimate and we’ll review what’s failing, what it takes to fix it properly, and what the flat written price will be.
FAQs
Properly installed Sterling pavers last 25-30 years in Boca Raton, though joint sand maintenance every 2-3 years and sealing every 4-5 years extends that toward the upper end. Salt air near the coast accelerates surface wear on lower-grade concrete pavers. Call (754) 254-8065 for an exact quote on restoration - estimates are free.
Partial repair is viable when fewer than 15% of pavers are affected and the base remains sound. We lift the affected area, re-screed the bedding layer, and reinstall with matched material. If the base has settled or washed out, spot repair becomes false economy. We document the base condition with photos so you can see the difference before deciding.
Most residential driveway replacements in Boca Raton take 3-5 working days, assuming no permit delays. Day one is removal and base prep; days two through four are base installation, compaction, and paver laying; day five is joint sand and final compaction. We schedule each phase with a sign-off checkpoint, so the next crew does not start until the previous phase is verified.
We do not stock Sterling pavers on the truck - the color and series matching requires a job-specific order - but we maintain same-day sourcing relationships with regional distributors for in-production lines. For discontinued Sterling series, our Belgard and Techo-Bloc equivalents are typically available within 48 hours. We confirm material availability before you sign the written quote, not after.
Rowan Construction Group Boca Raton is an independent service provider and is not affiliated with Sterling. We also stock parts for and install KraftMaid, Cambria, and Silestone products across our seven trades.
Written by Grant Rowan, Owner, Rowan Construction Group Boca Raton at Rowan Construction Group Boca Raton, serving Boca Raton and nearby areas.







Before
After
Before
After
Before
After