Kitchen Remodeling in Coral Springs - One Written Price, No Change Orders

Fast, Reliable Kitchen Remodeling Across Coral Springs

A full kitchen remodel in Coral Springs typically runs $14,000-$45,000, with most projects completed in 6-10 weeks once permits are issued. We’re Rowan Construction Group, and our crews serve Coral Springs from our Miami-area dispatch office - close enough for daily site visits, far enough that we don’t charge coastal-premium overhead. Call (754) 254-8065 to schedule your free written estimate.

Call (754) 254-8065

Coral Springs is different from the rest of Broward County. The city was built almost entirely in a single generational wave as one of Florida’s first large master-planned communities, with the bulk of its housing stock dating to the 1970s and 1980s - all pre-Hurricane Andrew construction. That means your kitchen walls almost certainly hide original wiring, undersized framing, and missing hurricane straps that newer cities don’t deal with. We’ve remodeled kitchens from the Riverside section off Royal Palm Boulevard to neighborhoods near Coral Ridge Drive and Sample Road, and the pattern is consistent: opening the wall is where the real inspection starts.

Why Rowan Construction Group Boca Raton Is Coral Springs’s Preferred Kitchen Remodeling Company

We’ve delivered 4,000-plus projects since 2007, every one with a written price before work started and a documented photo record when the crew left. In Coral Springs specifically, that discipline matters more than usual. The city’s uniform stock of pre-1994 CBS homes means permit inspectors know exactly what to look for, and so do we.

Our Kitchen Remodeling team has handled full gut renovations in the neighborhoods around Wiles Road, Turtle Run, and the Maplewood area. Homeowners in Coral Springs find us through the same research process they use for appliances - reading three-star reviews, comparing line-item quotes, checking whether the contractor actually pulls permits. Our reviews from Coral Springs customers consistently cite two things: the price on the page matched the final invoice within a few percent, and the photo documentation showed exactly what was found behind the drywall.

Calls are answered by a live person 24/7. Scheduling is coordinated from our Miami office, with crews dispatched to Coral Springs daily. Background-checked, uniformed technicians arrive with the written scope, the signed contract, and the Haven Standard terms already in hand.

Our Kitchen Remodeling Services in Coral Springs

Full Kitchen Remodeling

A full kitchen remodel in Coral Springs starts with what we call an “open-wall assumption.” Because the dominant housing stock is concrete block and stucco (CBS) built between 1970 and 1993, we price every full remodel with allowances for electrical rough-in updates, framing reinforcement, and the hurricane-strap retrofits that Broward County inspectors now flag as essentially mandatory. On a 1986 CBS home off Royal Palm Boulevard in the Riverside section, our crew demolished a kitchen wall between the range and the former pantry and found no hurricane straps at the roof-to-wall connection - a Broward County inspector flagged it during the rough-in inspection. We wrote the strap retrofit, permit revision, and updated load-bearing tie details into the scope as a signed change order before touching the framing, then delivered the KraftMaid cabinetry, Cambria quartz countertops, and Silestone island on schedule with the strap work inspected and signed off. That’s how we handle surprises in Coral Springs: priced in writing, signed before we proceed.

Kitchen Design & Layout

The planned-community origins of Coral Springs mean tract layouts are repetitive - galley kitchens, L-shaped plans with adjacent pantries, similar window placements from block to block. That predictability is an advantage. We can show you three layout options for your specific floor plan based on actual remodels we’ve completed in matching homes. Our design process includes a structural walk-through to identify load-bearing walls, since many Coral Springs kitchens have walls that carry roof loads but lack the documentation newer homes include. We mark every element on the plan: cabinet run dimensions, appliance rough-in locations, and the permit-triggered upgrades we expect.

Cabinets & Countertops

We source from fifty-plus vetted brands, including KraftMaid and Wellborn cabinets, Cambria and Caesarstone countertops. For Coral Springs kitchens, we specify moisture-resistant cabinet box construction as standard - the city’s flat, low-lying drainage plain at the eastern edge of the Everglades means humidity management matters year-round, and the June-October rainy season can push the water table to within 18-24 inches of the surface. Cabinet installation runs $4,000-$13,000; quartz and granite countertop installation is $2,000-$6,500. Both are quoted as flat prices with written scopes before work begins.

Backsplash, Tile & Flooring

Waterproofing assembly is where Coral Springs remodels fail when contractors cut corners. We specify cementitious backer board with liquid-applied membrane behind backsplashes and full tile surrounds, not paper-faced drywall or standard green board. The high water table and HVHZ wind-driven rain exposure mean any gap in the waterproofing shows up as mold or delamination within a season or two. Backsplash installation runs $800-$2,500. Flooring scope includes substrate inspection - original slab in these homes often needs leveling compound or crack isolation membrane before tile goes down.

Kitchen Island Installation

Island installs in Coral Springs frequently require electrical and plumbing rough-in extensions across slab-on-grade construction. We core-drill with vacuum extraction to control concrete dust, run conduit and supply lines, and restore the slab with epoxy-sealed patches. Island installation runs $3,000-$10,000 depending on utility extensions, countertop overhang, and whether the island is fixed or incorporates seating with knee-space clearance.

Before

After

Trusted Brands We Service in Coral Springs

We maintain sourcing depth across fifty-plus vetted brands so the written quote carries honest numbers rather than inflated allowances. For Coral Springs kitchen remodels, we regularly specify KraftMaid and Wellborn cabinet lines, Cambria and Caesarstone quartz surfaces, and Kohler fixtures. We don’t stock inventory in a warehouse - we order to job with confirmed lead times, which means your cabinets aren’t sitting in humidity before installation. For outdoor kitchen extensions or patio-adjacent work, we’ve used Belgard pavers and Unilock retaining systems where the grade requires it. Every brand is named in the written scope with model numbers and warranty terms, so you can screenshot and compare.

Common Kitchen Remodeling Problems We See in Coral Springs Homes

• Permit-triggered hurricane strap retrofits. Opening a kitchen wall in a pre-1994 Coral Springs home almost reliably exposes missing or undersized roof-to-wall hurricane straps. Broward County inspectors flag it, the permit won’t close without it, and the retrofit requires a structural engineer’s detail if the tie-beam configuration is non-standard. We price this allowance into every pre-1994 quote.
• Original aluminum or ungrounded wiring behind existing cabinets. The 1970s-1980s construction wave predates modern GFCI and AFCI requirements. Once the cabinets come out, the inspector sees the old wiring and requires full rough-in updates to current Florida Building Code. We inspect accessible junction boxes during the estimate visit and write the electrical scope accordingly.
• Failed waterproofing behind sinks and dishwashers. Previous remodels or original construction often used paper-faced drywall or inadequate membrane behind wet areas. In Coral Springs’s high-humidity, high water-table environment, this degrades to mold and substrate rot. We strip to studs, treat any fungal growth, and install cementitious backer with liquid membrane - not as an upgrade, as standard.
• Undersized framing for modern appliance loads. Original kitchen walls in these homes were framed for the appliance weights and ventilation of forty years ago. A 36-inch pro range or built-in refrigerator requires reinforced floor framing and dedicated 240V or 120V circuits that the original construction didn’t anticipate. We verify load paths and electrical capacity before demolition begins.

Pricing for Kitchen Remodeling in Coral Springs, FL

We Also Serve Cities Near Coral Springs

Our crews work throughout northwest Broward County. We regularly handle Kitchen Remodeling in Coral Springs and neighboring Margate, Coconut Creek, Pompano Beach, and Deerfield Beach. The same permit requirements, housing stock patterns, and inspection standards apply across this corridor, so our pricing and scheduling discipline travels with us.

FAQs - Kitchen Remodeling in Coral Springs