Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterConstruction in Pompano Beach, FL
Roofing, windows, and exterior construction in Pompano Beach must meet Broward County’s High-Velocity Hurricane Zone code, the strictest building standard in the continental U.S., which means every permitted re-roof or window replacement on the city’s pre-1980 CBS homes triggers engineered roof-to-wall strapping and Miami-Dade NOA-approved product requirements that can double the original scope. We’re Rowan Construction Group, and we quote that full scope in writing before anyone picks up a tool. Call (754) 254-8065 for a free estimate with a flat price and written warranty.
Why Pompano Beach Homes Are Different
Most of Pompano Beach’s single-family housing stock went up between 1955 and 1980 as concrete block structure, or CBS, with flat or low-slope roofs, jalousie or single-pane aluminum windows, and no engineered roof-to-wall strapping. When we pull a permit for a re-roof or room addition today, the city enforces full HVHZ upgrades that didn’t exist when these homes were built. That means a roof replacement often requires structural reinforcement, and a window swap demands impact-rated products with proper fastening patterns into the block.
The city’s extensive tidal canal network and low coastal elevation push large residential areas into FEMA AE and VE flood zones, so elevated foundation design and flood-vent calculations are routine parts of our local construction planning. And waterfront lots on those canals face a sequential dual-agency gauntlet: South Florida Water Management District review, sometimes Army Corps of Engineers authorization for seawall or dock work, then the city building permit. That sequence routinely adds two to four months to waterfront timelines and catches inland-focused contractors off guard.
Meanwhile, the CRA’s conversion of the A1A beachfront motel corridor into luxury condos and mixed-use projects is running parallel to deep remediation of this inland pre-code stock. The same crews, the same permit offices, the same HVHZ standards - but two very different job types. We maintain separate estimating templates and material procurement tracks for each, because a high-rise new build and a 1962 CBS reroof don’t share a schedule or a supplier lead time.
Our Main Pompano Beach Services
Homeowners in Pompano Beach call us most often for interior renovations that must also resolve the same HVHZ and flood-zone realities. Here’s what those projects involve.
Kitchen Remodeling in Pompano Beach
A kitchen remodel in Pompano Beach often starts with a scope that seems straightforward - cabinets, counters, layout - then expands when we find the original 1960s electrical panel won’t handle a modern appliance load, or when the permit triggers a full rewiring to current code. We price that discovery in the initial quote, not as a surprise change order. Our crews have handled full-gut renovations in Harbor Village and partial updates in Collier City, always with the written price locked before demolition. Kitchen Remodeling in Pompano Beach
Bathroom Remodeling in Pompano Beach
Bathrooms in pre-1980 Pompano Beach homes frequently have cast-iron drains, unvented fixtures, and substrate damage from decades of humidity penetration through single-pane windows. We inspect with a camera scope before quoting, document what we find with photos, and specify brands like Kohler and Toto with local availability confirmed so lead times don’t stall the job. The quote includes the full plumbing rough-in, not just the finish work. Bathroom Remodeling in Pompano Beach
Home Additions & ADU in Pompano Beach
Room additions and ADU construction in Pompano Beach trigger the most complex permit path of any residential work: HVHZ structural requirements, flood-zone elevation calculations, and sometimes water-management district review for canal-adjacent lots. We’ve built second-story additions in Garden Isles and garage conversions in Kendall Green, each with the full sequential permit timeline priced and scheduled from day one. The written scope includes every agency submission, not just city building. Home Additions & ADU in Pompano Beach
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterRoofing in Pompano Beach
Roofing in Pompano Beach means working on flat or low-slope CBS structures built before engineered strapping was required, which means almost every permitted re-roof now requires roof-to-wall tie-down upgrades and Miami-Dade NOA-approved underlayment, fasteners, and shingles. The city’s position in the High-Velocity Hurricane Zone doesn’t allow exceptions. We’ve replaced roofs in Cresthaven where the original 1970s built-up roofing had three layers of material to remove, and in Loch Lomond where the soffit ventilation had to be re-engineered to meet current attic airflow standards. Roofing is the trade where Pompano Beach’s dual workload - high-end new construction on the CRA corridor and deep remediation inland - is most visible, because both demand the same HVHZ product compliance but with completely different structural starting points.
Roof Repair
Signs you need it
Water stains on the ceiling, granules collecting in gutters, or lifted flashing at parapet walls on flat roofs all indicate membrane or fastener failure that will accelerate through hurricane season.
What it costs in Pompano Beach
Most roof repairs in Pompano Beach run $400-$1,800, with tile roof repairs specifically at $600-$2,500 depending on whether we’re matching discontinued profiles or replacing underlayment.
How we do it
We photograph the damage from the attic and the roof surface, specify the exact NOA-approved repair materials, and complete the work with a documented photo record of the substrate condition before and after.
Roof Replacement & Installation
Signs you need it
Multiple leak locations, visible deck sagging between rafters, or an inspection revealing more than two existing shingle layers mean repair is no longer cost-effective against full replacement.
What it costs in Pompano Beach
A standard roof replacement in Pompano Beach typically costs $8,000-$20,000, while metal roof installation runs $15,000-$40,000 due to the heavier gauge requirements and specialized fastening for HVHZ compliance.
How we do it
We strip to the deck, install engineered strapping at all roof-to-wall connections, apply NOA-approved underlayment and fasteners, and finish with GAF or CertainTeed shingles specified to the written scope.
What Roofing Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Roof Repair | $400-$1,800 |
| Roof Replacement | $8,000-$20,000 |
| Metal Roof Installation | $15,000-$40,000 |
| Tile Roof Repair | $600-$2,500 |
How long does a roof replacement take in Pompano Beach?
Most residential roof replacements in Pompano Beach take 3-5 working days once materials arrive, but HVHZ inspections and the city’s permit queue can add 1-2 weeks to the start date. Call (754) 254-8065 for an exact quote - estimates are free.
Do I need impact-rated roofing in Pompano Beach?
Yes - Broward County’s HVHZ code requires Miami-Dade NOA-approved roofing products on every permitted project, which effectively mandates impact-resistant specifications. We specify only NOA-listed materials and include the documentation in your project file.
Windows & Doors in Pompano Beach
Window and door replacement in Pompano Beach is not a simple swap: the original jalousie and single-pane aluminum units in pre-1980 CBS homes were never engineered for HVHZ wind loads, so every permitted replacement requires impact-rated products with specific fastening patterns into the concrete block that most retrofit contractors underestimate. We’ve replaced windows in Palm Aire where the original steel frames had corroded into the block, requiring structural repair before the new units could be fastened, and in Cypress Bend where the HOA mandated specific exterior colors that had to be confirmed with the manufacturer before ordering. Windows & Doors work here demands both the product knowledge and the permit discipline to pass HVHZ inspection on the first try.
Impact Windows & Doors
Signs you need it
Single-pane glass, non-impact rated sliders, or corroded aluminum frames that rattle in a thunderstorm all indicate a window system that will fail under HVHZ wind-borne debris impact.
What it costs in Pompano Beach
Full impact window installation for a typical Pompano Beach home runs $8,000-$25,000, while standard window replacement without impact rating is $4,500-$15,000 - though impact rating is required for permits on most replacements.
How we do it
We measure each opening for square and plumb, specify NOA-approved impact units with the proper fastening schedule into the CBS block, and seal with approved flashing tape to prevent the moisture intrusion that damages so many local installations.
Window Replacement
Signs you need it
Fogged insulated glass, operable sashes that won’t close fully, or visible frame rot at the sill indicate seal failure and air infiltration that drives cooling costs up year-round.
What it costs in Pompano Beach
Standard window replacement in Pompano Beach typically costs $4,500-$15,000 depending on unit count, frame material, and whether the project triggers full HVHZ upgrade requirements.
How we do it
We remove the existing unit, inspect the block opening for spalling or moisture damage, install the new window with shims and fasteners per the manufacturer’s HVHZ detail, and foam-seal before trim installation.
What Windows & Doors Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Impact Window Installation | $8,000-$25,000 |
| Window Replacement | $4,500-$15,000 |
Can I replace windows without impact glass in Pompano Beach?
Generally no - Broward County HVHZ code requires impact-rated or protected openings on all permitted window replacements, and the city enforces this without exception. We quote only code-compliant products and include the NOA documentation.
How do I know if my current windows are impact rated?
Look for a permanent mark or label on the glass or frame indicating Miami-Dade NOA approval or Florida Product Approval; if there’s no mark, they’re not rated. Call (754) 254-8065 and we’ll inspect and document what you have - estimates are free.
Fence Installation in Pompano Beach
Fence installation in Pompano Beach runs into two local realities that inland Broward contractors often miss: the tidal canal network and flood-zone placement restrictions that govern how close to the waterline any structure can go, and the HVHZ wind-load requirements that demand deeper post footings and specific fastening for any fence over six feet. We’ve installed vinyl privacy fencing in Harbor Village where the lot backed directly onto a canal and the setback required South Florida Water Management District confirmation, and aluminum pool enclosures in Cypress Bend where the posts had to be set in concrete piers below the seasonal high water table. Fence Installation here requires checking two permit paths, not one.
Vinyl Fence
Signs you need it
Rotting wood pickets, rusting chain link, or a fence line that no longer provides privacy from adjacent multi-family construction all point to replacement with a low-maintenance alternative.
What it costs in Pompano Beach
Vinyl fence installation in Pompano Beach typically runs $3,500-$9,000 depending on linear footage, post depth requirements for wind load, and whether the lot requires flood-zone setback verification.
How we do it
We locate underground utilities, set posts in concrete piers below the frost and water table line with galvanized brackets, and rack the panels to grade for a consistent top line that meets HOA and code requirements.
Aluminum Fence
Signs you need it
Corroded steel ornamental fencing, pool code violations on an existing barrier, or a need for security without the visual weight of solid panel construction all indicate aluminum as the appropriate replacement.
What it costs in Pompano Beach
Aluminum fence installation in Pompano Beach generally costs $4,000-$10,000, with pool code-compliant installations at the higher end due to the self-closing gate hardware and specific picket spacing requirements.
How we do it
We lay out the line with grade stakes, core-drill or excavate post holes to the engineer-specified depth for HVHZ wind load, set powder-coated aluminum posts, and hang gates with adjustable self-closing hinges that we tension and test before leaving.
What Fence Installation Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
Do I need a permit for a fence in Pompano Beach?
Yes - any fence over four feet in height or any pool barrier requires a city building permit, and canal-front lots may need additional water management district clearance. We handle the full permit application as part of our written scope.
How deep do fence posts need to be in Pompano Beach?
HVHZ requirements typically demand 24-30 inches of embedment in concrete for six-foot privacy fencing, with deeper piers for aluminum ornamental work in exposed locations. Call (754) 254-8065 and we’ll specify the exact depth for your lot - estimates are free.
Driveway & Pavers in Pompano Beach
Driveway and paver work in Pompano Beach confronts a substrate reality that northern contractors rarely see: the high water table and sandy coastal soils that shift with seasonal moisture, plus the FEMA flood-zone requirements that govern how much impervious surface a lot can carry. We’ve replaced concrete driveways in Collier City where the original slab had cracked from root intrusion and poor base compaction, and installed Belgard paver driveways in Garden Isles where the homeowner needed permeable installation to stay within stormwater retention calculations. Driveway & Pavers projects here require soil assessment before any surface material is specified.
Paver Driveways
Signs you need it
Spiderweb cracking across concrete, pooling water that won’t drain, or a driveway surface that’s sunken at the garage apron all indicate base failure that pavers with proper edge restraint and bedding can solve.
What it costs in Pompano Beach
Paver driveway installation in Pompano Beach typically runs $7,000-$18,000, with Belgard and Techo-Bloc products specified to the written quote and local availability confirmed before we schedule excavation.
How we do it
We excavate to the engineered base depth, install and compact crushed stone in lifts, set edge restraints on concrete haunching, lay bedding sand, and place pavers with mechanical vibration and polymeric sand joint stabilization.
Concrete Driveways & Concrete Work
Signs you need it
Extensive surface spalling, exposed aggregate from freeze-thaw damage, or a slab that’s settled more than two inches from the garage floor all mean repair is temporary and replacement is the cost-effective path.
What it costs in Pompano Beach
Concrete driveway installation in Pompano Beach generally costs $4,500-$12,000, while asphalt driveway paving runs $3,500-$9,000 though asphalt is less common in this market due to heat softening and flood-zone permeability concerns.
How we do it
We remove the existing slab, regrade for positive drainage away from the foundation, install a compacted sub-base, place rebar or fiber mesh per engineering, pour 4,000 PSI concrete with control joints at calculated spacing, and broom finish for traction.
What Driveway & Pavers Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Paver Driveway Installation | $7,000-$18,000 |
| Concrete Driveway Installation | $4,500-$12,000 |
| Asphalt Driveway Paving | $3,500-$9,000 |
Do pavers hold up in Pompano Beach’s flooding?
Yes - properly installed pavers with open-graded base and permeable joint sand actually drain better than solid concrete, which is why we specify them for flood-zone lots where impervious surface limits apply. The base design is engineered to your lot’s specific conditions.
How long before I can drive on a new paver driveway?
We recommend 48-72 hours before light vehicle traffic on paver installations, with full curing of the edge restraint concrete at 7 days. Call (754) 254-8065 for an exact timeline with your specific material - estimates are free.
Brands We Service in Pompano Beach
We maintain sourcing depth across fifty-plus vetted brands so our written quotes carry honest numbers rather than inflated allowances. For roofing, we stock and install GAF and CertainTeed shingles with confirmed NOA approval; for windows, we work with multiple impact-rated manufacturers to match HOA color and profile requirements. Fixture lines from Grohe and Sterling are available for bath and kitchen projects with local distribution confirmed before we quote. See our brands for the full list and current availability.
Pricing for Construction in Pompano Beach, FL
| Service | Typical range in Pompano Beach |
|---|---|
| Kitchen Remodel | $14,000-$45,000 |
| Bathroom Remodel | $9,000-$28,000 |
| Home Addition | $45,000-$130,000 |
| ADU Construction | $90,000-$220,000 |
| Roof Replacement | $8,000-$20,000 |
| Metal Roof Installation | $15,000-$40,000 |
| Impact Window Installation | $8,000-$25,000 |
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
| Paver Driveway Installation | $7,000-$18,000 |
| Concrete Driveway Installation | $4,500-$12,000 |
| Garage Conversion | $30,000-$80,000 |
Prices in Pompano Beach push toward the higher end when HVHZ structural upgrades, flood-zone engineering, or water-management district review is required - which is why we inspect before quoting and specify every contingency in the written scope. Under Clause 1 of The Haven Standard, that written price is delivered before any work starts, every time, with no change proceeding without a signed change order.
Neighborhoods We Serve in Pompano Beach
We work across Pompano Beach’s full residential map, from the canal-front lots of Garden Isles and Harbor Village to the golf-course communities of Palm Aire and the established blocks of Cresthaven and Collier City. Crews are dispatched from our Miami office with material staged locally, and we schedule to minimize travel time across Broward County.
- Garden Isles
- Harbor Village
- Palm Aire
- Cresthaven
- Collier City
Service Area - Cities Near Pompano Beach
Our crews serve the full Broward County corridor and adjacent communities. We regularly work in Coconut Creek, FL to the north, Margate, FL and Coral Springs, FL inland, and Deerfield Beach, FL along the coast, all under the same HVHZ standards and permit disciplines that govern our Pompano Beach projects.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Construction in Pompano Beach
We typically schedule site visits within 2-3 business days, with written quotes following within 48 hours of inspection. Calls are answered by a live person 24/7, and we coordinate dispatch from our Miami office to minimize scheduling delays across Broward County.
Yes - permit application, fee payment, and inspection scheduling are included in our written scope for every project. We handle the full sequence, including water-management district pre-clearance for canal-front lots, so the customer doesn’t navigate multiple agencies alone.
Most likely - communities like Palm Aire and Cypress Bend have active architectural review boards with specific material and color requirements. We obtain the HOA guidelines before quoting and submit the product data sheets as part of our pre-construction package to prevent mid-project holds.
Call (754) 254-8065 to schedule your free estimate. We’ll inspect your property, document what we find with photos, and deliver a written price with a flat scope and written warranty before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local construction pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pompano Beach Customers Say
"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.