Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterConstruction in Boynton Beach, FL
Roofing and structural work in Boynton Beach runs into a specific problem: thousands of homes east of Congress Avenue were built as concrete block retirement communities between 1960 and 1985, many with roof-to-wall connections that predate modern hurricane standards and single-pane windows that no longer meet Palm Beach County’s wind-borne debris code. We’re Rowan Construction Group, and our crews handle permitted retrofits, impact-rated replacements, and full structural upgrades across these aging CBS structures every week. Call (754) 254-8065 for a written price before any work starts.
Why Boynton Beach Homes Are Different
The housing stock here is split by Congress Avenue into two distinct construction eras. East of Congress, Leisureville and similar 1960s-1980s retirement communities present aging concrete block stucco with minimal structural connectors and original jalousie or aluminum windows that trigger full opening replacements when any permitted work is undertaken. West of Congress, newer master-planned communities sit on former agricultural land with a high water table that complicates slab-on-grade additions and demands engineered drainage.
Boynton Beach sits squarely in Palm Beach County’s wind-borne debris region, so impact-resistant openings or compliant shutters are code-mandatory on all permitted construction. The Atlantic proximity means salt-laden air accelerates corrosion of metal fasteners and flashing, making coastal-grade material specification routine. Contractors pulling permits here also routinely encounter 1970s-era flat or low-slope roofs on retirement community clubhouses built with wood decking over steel bar joists, a combination that fails modern load calculations and requires structural engineering review before re-roof approval.
Our Main Boynton Beach Services
While this page covers roofing, windows, fences, and hardscaping, Boynton Beach homeowners most often call us for these three trades:
Kitchen Remodeling in Boynton Beach
Gutting a 1970s Leisureville kitchen means dealing with concrete block walls that can’t be casually reconfigured, original cast-iron plumbing stacks, and electrical panels that may need service upgrades to handle modern appliance loads. We quote every kitchen remodel with a flat written price that accounts for these structural realities before demolition begins. Kitchen Remodeling in Boynton Beach covers our full process, from cabinet selection through final inspection.
Bathroom Remodeling in Boynton Beach
Bathrooms in Boynton Beach’s older CBS homes often contain original galvanized supply lines, cast-iron drains, and tub surrounds mortared directly to block walls. Our crews remove these assemblies without damaging the waterproofing integrity of the structure, and we specify moisture-barrier systems that meet current Florida Building Code for enclosed shower assemblies. Bathroom Remodeling in Boynton Beach details material options and typical timelines.
Home Additions & ADU in Boynton Beach
Adding square footage to a pre-Andrew CBS home in Boynton Beach requires structural tie-in engineering, impact-rated openings on all new construction, and careful attention to the high water table west of Congress Avenue. We handle the full permit package through Palm Beach County Building Division, including the engineering review that 1970s-era flat-roof structures almost always trigger. Home Additions & ADU in Boynton Beach explains our flat-price quoting for additions and garage conversions.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterRoofing in Boynton Beach
Boynton Beach’s concentration of 1960s-1980s concrete block retirement communities means we regularly encounter roofs that were built to pre-Andrew standards with minimal uplift resistance and decking that may be wood over steel bar joists on clubhouse or villa structures. The salt air accelerates fastener corrosion, and the wind-borne debris zone mandates impact-rated materials or shutter systems on any permitted re-roof that involves structural modification. Roofing covers our full service range across South Florida.
Roof Repair
Signs you need it
Water staining on ceiling drywall, granule loss visible in gutters, or lifted shingles along the eaves after a named storm.
What it costs in Boynton Beach
Most roof repairs in Boynton Beach run $400-$1,800, with tile repairs starting higher due to the specialized underlayment and fastening.
How we do it
We photograph the full roof condition, replace damaged shingles or tiles with matching material, seal penetrations with coastal-grade flashing, and deliver a documented photo record of the completed repair.
Roof Replacement & Installation
Signs you need it
Multiple leak points, shingles past their rated lifespan, or a roof that failed the 40-year recertification required by many Boynton Beach insurers.
What it costs in Boynton Beach
A full roof replacement on a typical Boynton Beach single-family home ranges from $8,000-$20,000, with metal roofing starting at $15,000.
How we do it
We strip to decking, replace compromised sheathing, install GAF or CertainTeed underlayment and shingles per manufacturer spec, and pull permits through Palm Beach County with inspection scheduling included.
What Roofing Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Roof Repair | $400 - $1,800 |
| Roof Replacement | $8,000 - $20,000 |
| Metal Roof Installation | $15,000 - $40,000 |
How long does a roof replacement take in Boynton Beach?
Most residential roof replacements in Boynton Beach take 2-4 business days, with an additional 1-2 weeks for permit approval and inspection scheduling through Palm Beach County Building Division. Call (754) 254-8065 for a written timeline with your estimate.
Do you handle the permit for roof work in Boynton Beach?
Yes, we pull all roofing permits through Palm Beach County Building Division and schedule required inspections, including the structural engineering review that 1970s-era flat or low-slope roofs often trigger. Call (754) 254-8065 to schedule your free estimate.
Windows & Doors in Boynton Beach
The single-pane jalousie and aluminum windows original to Boynton Beach’s 1960s-1980s concrete block homes no longer satisfy Florida Building Code in Palm Beach County’s wind-borne debris region, which means any permitted remodel or addition triggers full opening replacement with impact-rated products. Salt-laden air also corrodes original aluminum frames and hardware, making functional failure common before code non-compliance even enters the conversation. Windows & Doors details our full product range and installation standards.
Window Replacement
Signs you need it
Corroded aluminum frames, failed seals with fogging between panes, or windows that no longer lock securely against wind pressure.
What it costs in Boynton Beach
Full window replacement for a typical Boynton Beach home runs $4,500-$15,000, with impact-rated vinyl or aluminum-clad products at the higher end of that range.
How we do it
We measure each opening to manufacturer spec, remove the original frame without damaging CBS stucco, install the new unit with coastal-grade fasteners and flashing, and finish with matching exterior sealant.
Impact Windows & Doors
Signs you need it
Permitted construction on a pre-Andrew home, insurance renewal requiring wind mitigation upgrades, or replacement of non-compliant jalousie or single-pane openings.
What it costs in Boynton Beach
Impact window installation for a full home in Boynton Beach typically ranges $8,000-$25,000, depending on opening count and product line selected.
How we do it
We specify laminated glass products that meet Miami-Dade and Palm Beach County impact standards, install with structural anchoring per engineer review, and provide the documentation required for wind mitigation insurance discounts.
What Windows & Doors Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Window Replacement | $4,500 - $15,000 |
| Impact Window Installation | $8,000 - $25,000 |
Do I need impact windows or can I use shutters in Boynton Beach?
Impact windows satisfy code permanently; shutters require deployment before a storm and still need engineering documentation for permit approval on new construction. Most Boynton Beach homeowners replacing original windows choose impact-rated products for the insurance discount and eliminated maintenance. Call (754) 254-8065 for product comparisons and a written quote.
How do I know if my current windows are code-compliant?
Single-pane aluminum or jalousie windows in Boynton Beach homes built before 1992 are almost certainly non-compliant; we provide a free opening assessment with photo documentation of current conditions and code status. Call (754) 254-8065 to schedule.
Fence Installation in Boynton Beach
Boynton Beach’s salt air and hurricane exposure create specific demands on fencing that inland Florida does not face, with metal components corroding faster and wood absorbing moisture from both humidity and storm surge in low-lying areas. Many of the city’s 1960s-1980s retirement communities also have active HOAs with strict material and height restrictions that must be resolved before permit application to Palm Beach County. Fence Installation covers our full material and design options.
Vinyl Fence
Signs you need it
HOA-mandated white or tan perimeter fencing, or replacement of wood fencing that has rotted at the posts due to ground contact in high-moisture soil.
What it costs in Boynton Beach
Vinyl fence installation in Boynton Beach typically runs $3,500-$9,000 for a standard residential lot, with price driven by linear footage and post depth requirements.
How we do it
We set posts in concrete below the frost line with stainless steel brackets, install UV-stabilized vinyl panels with expansion gaps for Florida temperature swings, and provide the as-built survey many Boynton Beach HOAs require.
Aluminum Fence
Signs you need it
Decorative pool enclosure or perimeter fencing where corrosion resistance and minimal maintenance are priorities, or HOA specification of metal-look fencing with hidden fasteners.
What it costs in Boynton Beach
Aluminum fence installation in Boynton Beach ranges $4,000-$10,000, with powder-coated coastal-grade finishes at the higher end for salt-air durability.
How we do it
We specify powder-coated aluminum with stainless steel fasteners, set posts in engineered concrete footings rated for wind uplift, and verify gate hardware operation before final walkthrough.
What Fence Installation Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
Does my HOA need to approve the fence before you install it?
Most Boynton Beach retirement communities and master-planned neighborhoods require HOA architectural review before permit application; we provide scaled drawings and material samples for that process as part of our standard quote. Call (754) 254-8065 to discuss your HOA’s specific requirements.
How deep do fence posts need to go in Boynton Beach soil?
Posts in Boynton Beach’s sandy, high-water-table soils typically require 24-30 inch concrete footings with drainage consideration; west of Congress Avenue, the higher water table may require engineered drainage or deeper setting. Call (754) 254-8065 for a site-specific assessment.
Driveway & Pavers in Boynton Beach
The high water table west of Congress Avenue and the aging original driveways in 1960s-1980s communities east of Congress both create demand for driveway replacement and upgrade work in Boynton Beach. Salt air and seasonal saturation also degrade concrete and asphalt faster than inland locations, while pavers offer better drainage and repairability in flood-prone areas. Driveway & Pavers covers our full hardscape service range.
Paver Driveways
Signs you need it
Cracked or settled concrete driveway with poor drainage, or desire for a permeable surface that handles Boynton Beach’s heavy rainfall and high water table better than solid concrete.
What it costs in Boynton Beach
Paver driveway installation in Boynton Beach ranges $7,000-$18,000, with Belgard and Techo-Bloc products specified for color retention and joint stability in coastal conditions.
How we do it
We excavate to engineered depth, install geotextile and compacted base rock for drainage, set pavers in herringbone or running bond pattern with edge restraints, and sweep polymeric sand into joints.
Concrete Driveways & Concrete Work
Signs you need it
Spalled or cracked original driveway with exposed aggregate, or new construction requiring a slab rated for the vehicle loads and soil conditions west of Congress Avenue.
What it costs in Boynton Beach
Concrete driveway installation in Boynton Beach typically runs $4,500-$12,000, with reinforced slabs and proper vapor barriers essential in high-water-table areas.
How we do it
We form to pitch for drainage, place reinforcement mesh or rebar per engineering, pour with air-entrained concrete for salt resistance, and control-joint at calculated spacing to prevent random cracking.
What Driveway & Pavers Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Paver Driveway Installation | $7,000 - $18,000 |
| Concrete Driveway Installation | $4,500 - $12,000 |
| Asphalt Driveway Paving | $3,500 - $9,000 |
Are pavers better than concrete in Boynton Beach’s climate?
Pavers handle ground movement and drainage better than monolithic concrete in Boynton Beach’s sandy, high-water-table soils, and individual paver replacement is simpler than full slab repair if settlement occurs. Call (754) 254-8065 for a site assessment and written comparison.
How long does a paver driveway last in Boynton Beach?
A properly installed paver driveway with quality base preparation lasts 25-30 years in Boynton Beach, with periodic joint sand refreshment; the modular surface avoids the structural cracks that plague concrete slabs in shifting coastal soils. Call (754) 254-8065 for a written estimate on your specific project.
Brands We Service in Boynton Beach
We source and install across fifty-plus vetted brands, including GAF and CertainTeed roofing, Grohe fixtures, and Sterling products, with parts stocked through our Miami-area supply chain for turnaround that doesn’t depend on distant warehousing. See our brands for the full list and availability.
Pricing for Construction in Boynton Beach, FL
| Service | Typical range in Boynton Beach |
|---|---|
| Roof Repair | $400 - $1,800 |
| Roof Replacement | $8,000 - $20,000 |
| Metal Roof Installation | $15,000 - $40,000 |
| Window Replacement | $4,500 - $15,000 |
| Impact Window Installation | $8,000 - $25,000 |
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Paver Driveway Installation | $7,000 - $18,000 |
| Concrete Driveway Installation | $4,500 - $12,000 |
| Asphalt Driveway Paving | $3,500 - $9,000 |
| Driveway Replacement | $5,000 - $14,000 |
| Paver Patio Installation | $3,500 - $11,000 |
Prices in Boynton Beach push toward the higher end when structural engineering review is required for 1970s-era flat roofs, when impact-rated products are mandated by code, or when high-water-table conditions west of Congress Avenue demand engineered drainage. Under Clause 1 of the Haven Standard, every project receives a flat written price before any work starts, with no change proceeding without a signed change order.
Neighborhoods We Serve in Boynton Beach
Our crews work across Boynton Beach’s full residential footprint, from the original retirement communities east of Congress to the newer master-planned developments west of Florida’s Turnpike. Scheduling and dispatch are coordinated from our Miami office with local crew deployment.
- Leisureville
- Quantum Park
- Abram’s Estates
- Hypoluxo Village
- Colonial Estates
Service Area - Cities Near Boynton Beach
We serve homeowners throughout central Palm Beach County and northern Broward, with regular project work in Delray Beach, FL, Boca Raton, FL, Deerfield Beach, FL, and Coconut Creek, FL. Each city carries its own permit jurisdiction and local conditions, and we quote accordingly with the same flat-price, written-scope standard.
Serving Boynton Beach, FL - Our Local Coverage Area
We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Construction in Boynton Beach
Permit timelines through Palm Beach County Building Division typically drive our start dates more than crew availability; most residential permits take 2-3 weeks for initial review, with 1970s-era structures often requiring an additional structural engineering review. We submit complete packages to avoid the revision delays that extend timelines.
Yes, we provide scaled drawings, material samples, and specification sheets for architectural review boards in Leisureville and similar communities; HOA approval must precede permit submission, and we build that sequence into our project timeline from the written quote forward.
Most construction work in Boynton Beach requires permits through Palm Beach County Building Division, with additional HOA architectural review in gated or deed-restricted communities; we pull all permits and schedule inspections as part of our standard service, included in the flat written price.
Call (754) 254-8065 to schedule your free estimate. Every quote is a flat written price with a written scope and written warranty, delivered before any work starts. That’s Clause 1 of the Haven Standard, and it’s how we’ve kept 4,000-plus projects within a few percent of the agreed number since 2007.
What happens when you call
- 1A real person answersNo phone trees - talk to a local construction pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Boynton Beach Customers Say
"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.